EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Highly Stretchable Polyrotaxane Thin‐Film Substrates for Printed Electronics

Vivek Manish iD, Roberto Baretta iD, Giada Bombardelli, Guglielmo Trentini, Chiara Morano iD, Andrea Gaiardo iD, Luisa Petti iD, Alvise Bagolini, Leonardo Pagnotta iD, Marco Frasconi iD, Maria F Pantano iD

Small Science · 2026-10 · 6 (10)

DOI: 10.1002/smsc.70412 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 16.10.2026. Verfasst von Vivek Manish und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Environmental and Mechanical Engineering University of Trento Trento Italy. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thin polymeric films with high mechanical robustness and stretchability are essential for the development of flexible and stretchable electronic devices. Here, we present a versatile strategy for fabricating freestanding polymer films with tunable mechanical properties while maintaining large stretchability. The films are fabricated by chemically cross‐linking multi‐arm poly(ethylene glycol) acrylate (4‐arm‐PEG‐A) with polyrotaxane (PR) units composed of α‐cyclodextrins (α‐CDs) threaded along a linear PEG backbone. By varying the degree of PR functionalization and its content, the mechanical properties of the films can be systematically tuned, enabling simultaneous enhancement of strength, toughness, and stiffness, with failure strains exceeding 150%. The resulting films were used as substrates for stretchable temperature sensors, which maintained stable performance under an applied strain of ~60%. These results demonstrate that polyrotaxane‐based thin films provide mechanically robust and functionally compatible substrates for stretchable electronics operating under large deformations.

Schlagwörter

Stichwörter der Autor:innen

flexible sensorsfreestanding filmsmechanical propertiespolyrotaxanetensile test

Autor:innen und Institutionen

  • Department of Civil Environmental and Mechanical Engineering University of Trento Trento Italy.
  • Department of Chemical Sciences University of Padova Padova Italy.
  • Center for Sensors and Devices Bruno Kessler Foundation Trento Italy.
  • Faculty of Engineering Free University of Bolzano-Bozen Bolzano Italy.
  • Department of Mechanical Energy and Management Engineering University of Calabria Rende Cosenza Italy.

ORCID-Profile: Vivek Manish, Roberto Baretta, Chiara Morano, Andrea Gaiardo, Luisa Petti, Leonardo Pagnotta, Marco Frasconi, Maria F Pantano

Zitieren

APA

Manish, V., Baretta, R., Bombardelli, G., Trentini, G., Morano, C., Gaiardo, A., Petti, L., Bagolini, A., Pagnotta, L., Frasconi, M., & Pantano, M. F. (2026). Highly Stretchable Polyrotaxane Thin‐Film Substrates for Printed Electronics. Small Science, 6(10). https://doi.org/10.1002/smsc.70412

Vancouver

Manish V, Baretta R, Bombardelli G, Trentini G, Morano C, Gaiardo A, et al. Highly Stretchable Polyrotaxane Thin‐Film Substrates for Printed Electronics. Small Science. 2026;6(10). doi:10.1002/smsc.70412

BibTeX
@article{Manish2026,
  author = {Manish, Vivek and Baretta, Roberto and Bombardelli, Giada and Trentini, Guglielmo and Morano, Chiara and Gaiardo, Andrea and Petti, Luisa and Bagolini, Alvise and Pagnotta, Leonardo and Frasconi, Marco and Pantano, Maria F},
  title = {Highly Stretchable Polyrotaxane Thin‐Film Substrates for Printed Electronics},
  journal = {Small Science},
  year = {2026},
  volume = {6},
  number = {10},
  doi = {10.1002/smsc.70412}
}
Kostenlos starten →