EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thin‐Film Thermal Sensors on Chitosan Substrates for Sustainable Transient Electronics

Ahmed Rasheed, Soufiane Krik, Sundus Riaz, Hafiza Faiqa Maqsood, Jacopo Nicoletti, Riccardo Zamboni, Guglielmo Trentini, Pietro Ibba, Franco Cacialli, Andrea Gaiardo, Giuseppe Cantarella, Niko Münzenrieder und 3 weitere

Advanced Electronic Materials · 2026-08 · 12 (16)

DOI: 10.1002/aelm.202500699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 16.04.2026. Verfasst von Ahmed Rasheed und 14 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, transient (bio)electronics has witnessed a remarkable surge for their potential in sustainable and biocompatible electronic solutions. Here, chitosan‐based films are demonstrated as versatile transient substrates for thin‐film thermal sensors, merging sustainability with standard microfabrication. Two sensor types are fabricated: resistive temperature detectors (RTDs) via sputtering of a 100 nm molybdenum (Mo) layer, and thermistors through subsequent deposition of a 50 nm amorphous indium gallium zinc oxide (a‐IGZO) semiconductor layer. Bi‐directional thermal characterization in physiologically relevant ranges (25–55 , 2.0% RH) reveals that both device types exhibited linear and reproducible responses. The thermistors show a significantly higher sensitivity (0.0184 ) more than an order of magnitude greater than the RTDs (0.0010 ), with minimal deviation during extended thermal cycling (standard deviations 0.016 and 0.0006, respectively). The sensors maintain full functionality under severe mechanical deformation, including twisting, folding, and bending to radii as small as 8 mm. Importantly, the devices are fully transient, dissolving completely in aqueous and mildly acidic environments within approximately 50 hours. This work establishes chitosan‐based substrates as a promising platform for functional transient electronics leveraging existing thin‐film technologies, paving the way for sustainable applications in soft robotics, agritech, and healthcare.

Zitieren

APA

Rasheed, A., Krik, S., Riaz, S., Maqsood, H. F., Nicoletti, J., Zamboni, R., Trentini, G., Ibba, P., Cacialli, F., Gaiardo, A., Cantarella, G., Münzenrieder, N., Lugli, P., Salvatore, G. A., & Petti, L. (2026). Thin‐Film Thermal Sensors on Chitosan Substrates for Sustainable Transient Electronics. Advanced Electronic Materials, 12(16). https://doi.org/10.1002/aelm.202500699

Vancouver

Rasheed A, Krik S, Riaz S, Maqsood HF, Nicoletti J, Zamboni R, et al. Thin‐Film Thermal Sensors on Chitosan Substrates for Sustainable Transient Electronics. Advanced Electronic Materials. 2026;12(16). doi:10.1002/aelm.202500699

BibTeX
@article{Rasheed2026,
  author = {Rasheed, Ahmed and Krik, Soufiane and Riaz, Sundus and Maqsood, Hafiza Faiqa and Nicoletti, Jacopo and Zamboni, Riccardo and Trentini, Guglielmo and Ibba, Pietro and Cacialli, Franco and Gaiardo, Andrea and Cantarella, Giuseppe and Münzenrieder, Niko and Lugli, Paolo and Salvatore, Giovanni Antonio and Petti, Luisa},
  title = {Thin‐Film Thermal Sensors on Chitosan Substrates for Sustainable Transient Electronics},
  journal = {Advanced Electronic Materials},
  year = {2026},
  volume = {12},
  number = {16},
  doi = {10.1002/aelm.202500699}
}
Kostenlos starten →