EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coconut Oil as Lipid‐Based 3D‐Printable Sacrificial Material for the Facile Biofabrication of Precise Perfusable Microchannels and Freeform Hydrogel Structures

Salma Mansi iD, Susanne Halbherr, Franziska Möller iD, Anna Lotta Ernst, Sophie Bauer iD, Zinaida Kuznetsova iD, Myrto Karagiannakidou Samsarelou, Carolin A Rickert iD, Dominik Heinrich, Zhaoyang Zhong iD, Diana M Rojas-González, Oliver Lieleg iD und 1 weitere

Small Science · 2026-08 · 6 (8)

DOI: 10.1002/smsc.70371 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small Science, online erschienen am 19.08.2026. Verfasst von Salma Mansi und 12 weiteren Autor:innen. Beteiligte Einrichtung: TUM School of Engineering and Design Department of Mechanical Engineering Chair of Medical Materials and Implants Technical University of Munich Garc…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sacrificial materials provide temporary support in the biofabrication of 3D hydrogel constructs featuring cavities and overhangs or having slow polymerization preventing printability. Currently used sacrificial hydrogel inks take up water from the surrounding matrix hindering the shape fidelity of the final construct, for example microchannels with a flattened/irregular cross‐section. Furthermore, some inks require removal by chemical dissolution or mechanical forces with potential cytotoxic effects and damage of the main construct. Here, we propose lipid‐based sacrificial materials to address these limitations and introduce coconut oil as proof‐of‐concept hydrophobic, temperature‐responsive, cytocompatible, and printable sacrificial material that enables a cell‐friendly removal process. We demonstrate its suitability in the fabrication of microchannels with circular cross‐section and dimensional accuracy, which support functional endothelial layer formation, as demonstrated with dextran diffusion. Furthermore, we show the versatility of coconut oil by applying it as support material for the additive manufacturing of 3D macroscale hydrogel structures with overhangs and bridging elements as well as support bath for the fabrication of complex vascular structures in freeform embedded printing. The applicability with various hydrogels with different gelation mechanisms and the ease of use and the large availability at a low cost make the lipid‐based ink a promising material in biofabrication.

Schlagwörter

Stichwörter der Autor:innen

assisted printingcoconut oilfugitive materialmicrochannelsacrificial materialsupport bathsupport material

Autor:innen und Institutionen

  • TUM School of Engineering and Design Department of Mechanical Engineering Chair of Medical Materials and Implants Technical University of Munich Garching Germany.
  • Munich Institute of Biomedical Engineering (MIBE) Technical University of Munich Garching Germany.
  • Munich Institute of Integrated Materials Energy and Process Engineering Technical University of Munich Garching Germany.
  • TUM School of Engineering and Design Department of Materials Engineering Technical University of Munich Germany Garching Germany.
  • TUM Center for Functional Protein Assemblies (CPA) Technical University of Munich Garching Germany.

ORCID-Profile: Salma Mansi, Franziska Möller, Sophie Bauer, Zinaida Kuznetsova, Carolin A Rickert, Zhaoyang Zhong, Oliver Lieleg, Petra Mela

Zitieren

APA

Mansi, S., Halbherr, S., Möller, F., Ernst, A. L., Bauer, S., Kuznetsova, Z., Karagiannakidou Samsarelou, M., Rickert, C. A., Heinrich, D., Zhong, Z., Rojas-González, D. M., Lieleg, O., & Mela, P. (2026). Coconut Oil as Lipid‐Based 3D‐Printable Sacrificial Material for the Facile Biofabrication of Precise Perfusable Microchannels and Freeform Hydrogel Structures. Small Science, 6(8). https://doi.org/10.1002/smsc.70371

Vancouver

Mansi S, Halbherr S, Möller F, Ernst AL, Bauer S, Kuznetsova Z, et al. Coconut Oil as Lipid‐Based 3D‐Printable Sacrificial Material for the Facile Biofabrication of Precise Perfusable Microchannels and Freeform Hydrogel Structures. Small Science. 2026;6(8). doi:10.1002/smsc.70371

BibTeX
@article{Mansi2026,
  author = {Mansi, Salma and Halbherr, Susanne and Möller, Franziska and Ernst, Anna Lotta and Bauer, Sophie and Kuznetsova, Zinaida and Karagiannakidou Samsarelou, Myrto and Rickert, Carolin A and Heinrich, Dominik and Zhong, Zhaoyang and Rojas-González, Diana M and Lieleg, Oliver and Mela, Petra},
  title = {Coconut Oil as Lipid‐Based 3D‐Printable Sacrificial Material for the Facile Biofabrication of Precise Perfusable Microchannels and Freeform Hydrogel Structures},
  journal = {Small Science},
  year = {2026},
  volume = {6},
  number = {8},
  doi = {10.1002/smsc.70371}
}
Kostenlos starten →