EUVIMEDEUVIMED entdecken
Crossref

UV‐Cured Semi‐Interpenetrating Polymer Network Electrolyte for High‐Performance Bipolar‐Stacked Quasi‐Solid‐State Lithium Metal Batteries

Jiyeon Lee iD, Anh Le Mong iD, Hyocheol Lee iD, Dukjoon Kim

Small · 05.11.2026

DOI: 10.1002/smll.76636 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 05.11.2026. Verfasst von Jiyeon Lee und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, Sungkyunkwan University, Suwon, Gyeonggi, Republic of Korea. Die Arbeit nennt 60 Literaturangaben. Gefördert von: Technology Development Program, Brain Pool Program - National Research Foundation of Korea, Ministry of Science and ICT.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium metal batteries are regarded as promising candidates for next‐generation energy storage systems due to their high energy density. However, electrolyte instability and lithium dendrite formation remain critical challenges. Accordingly, a semi‐interpenetrating polymer network (semi‐IPN) quasi‐solid polymer electrolyte (QSPE) is developed by incorporating polyethylene glycol monomethyl ether methacrylate (PEGMA), polyethylene glycol dimethacrylate (PEGDA), and vinyl ethylene carbonate (VEC) into a polyvinyl alcohol (PVA) matrix via UV curing. The prepared semi‐IPN QSPE exhibits a high ionic conductivity of 1.36 × 10 −3 S cm −1 and a Li‐ion transference number of 0.78 at room temperature, while maintaining flexibility with a tensile strength of 5.2 MPa and a Young's modulus of 25.1 MPa. Furthermore, it demonstrates a wide electrochemical stability window up to 4.8 V and excellent interfacial compatibility with a lithium (Li) anode. Based on these properties, bipolar cells, constructed by serially connecting two LFP/QSPE/Li unit cells, not only achieve an open‐circuit voltage of 6.36 V stably, but also deliver a discharge capacity of 144 mAh g −1 at 0.2 C with 77.0% capacity retention and 99.0% coulombic efficiency after 100 cycles.

Schlagwörter

Stichwörter der Autor:innen

UV‐curingbipolar stackingionic conductivitymechanical integritysemi‐interpenetrating networksolid lithium batteries

Autor:innen und Institutionen

  • Department of Chemical Engineering, Sungkyunkwan University, Suwon, Gyeonggi, Republic of Korea.

ORCID-Profile: Jiyeon Lee, Anh Le Mong, Hyocheol Lee

Förderung

  • Technology Development Program
  • Brain Pool Program - National Research Foundation of Korea
  • Ministry of Science and ICT
  • Ministry of SMEs and Startups
  • Ministry of Science and ICT, South Korea

Zitieren

APA

Lee, J., Le Mong, A., Lee, H., & Kim, D. (2026). UV‐Cured Semi‐Interpenetrating Polymer Network Electrolyte for High‐Performance Bipolar‐Stacked Quasi‐Solid‐State Lithium Metal Batteries. Small. https://doi.org/10.1002/smll.76636

Vancouver

Lee J, Le Mong A, Lee H, Kim D. UV‐Cured Semi‐Interpenetrating Polymer Network Electrolyte for High‐Performance Bipolar‐Stacked Quasi‐Solid‐State Lithium Metal Batteries. Small. 2026. doi:10.1002/smll.76636

BibTeX
@article{Lee2026,
  author = {Lee, Jiyeon and Le Mong, Anh and Lee, Hyocheol and Kim, Dukjoon},
  title = {UV‐Cured Semi‐Interpenetrating Polymer Network Electrolyte for High‐Performance Bipolar‐Stacked Quasi‐Solid‐State Lithium Metal Batteries},
  journal = {Small},
  year = {2026},
  doi = {10.1002/smll.76636}
}
Kostenlos starten →