Polymer‐Ion Interaction Prompted Quasi‐Solid Electrolyte for Room‐Temperature High‐Performance Lithium‐Ion Batteries
Advanced Materials · 2024-11 · 36 (45)
DOI: 10.1002/adma.202409838 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.09.2024. Verfasst von Fangzheng Liu und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, 999077, C…. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Innovation and Technology Commission of the Hong Kong Special Administrative Region, Research Grant Council of the Hong Kong Special Administrative Region.
Abstract (Originalsprache)
Lithium‐ion batteries using quasi‐solid gel electrolytes (QSEs) have gained increasing interest due to their enhanced safety features. However, their commercial viability is hindered by low ionic conductivity and poor solid–solid contact interfaces. In this study, a QSE synthesized by in situ polymerizing methyl methacrylate (MMA) in 1,2–dimethoxyethane (DME)‐based electrolyte is introduced, which exhibits remarkable performance in high‐loading graphite||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) pouch cells. Owing to the unique solvent‐lacking solvation structure, the graphite exfoliation caused by the well‐known solvent co‐intercalation is prohibited, and this unprecedented phenomenon is found to be universal for other graphite‐unfriendly solvents. The high ionic conductivity and great interfacial contact provided by DME enable the quasi‐solid graphite||NCM811 pouch cell to demonstrate superior C‐rate capability even at a high cathode mass loading (17.5 mg cm ‐2 ), surpassing liquid carbonate electrolyte cells. Meanwhile, the optimized QSE based on carbonates exhibits excellent cycle life (92.4% capacity retention after 1700 cycles at 0.5C/0.5C) and reliable safety under harsh conditions. It also outperforms liquid electrolytes in other high‐energy‐density batteries with larger volume change. These findings elucidate the polymer's pivotal role in QSEs, offering new insights for advancing quasi‐solid‐state battery commercialization.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemical and Biological Engineering, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, 999077, China.
- Department of Materials Science & Engineering, School of Innovation and Entrepreneurship, Southern University of Science and Technology, Shenzhen, 518055, China.
- Advanced Materials Thrust, The Hong Kong University of Science and Technology, Guangzhou, 511400, China.
- Dongguan Key Laboratory of Interdisciplinary Science for Advanced Materials and Large-Scale Scientific Facilities, School of Physical Sciences Great Bay University, Dongguan, 523000, China.
- Research Institute of Materials Science, South China University of Technology, Guangzhou, 510640, China.
- CIAC-HKUST Joint Laboratory for Hydrogen Energy, Energy Institute, The Hong Kong University of Science and Technology, Clear Watery Bay, Hong Kong, Kowloon, 999077, China.
ORCID-Profile: Fangzheng Liu, Jun Wang, Minhua Shao
Förderung
- National Natural Science Foundation of China
- Innovation and Technology Commission of the Hong Kong Special Administrative Region
- Research Grant Council of the Hong Kong Special Administrative Region
- Shenzhen-Hong Kong-Macao Science and Technology Innovation
- Guangzhou Science and Technology Bureau
- Guangdong Special Support Program
Zitieren
APA
Liu, F., Wang, J., Chen, W., Yuan, M., Wang, Q., Ke, R., Zhang, G., Chang, J., Wang, C., Deng, Y., Wang, J., & Shao, M. (2024). Polymer‐Ion Interaction Prompted Quasi‐Solid Electrolyte for Room‐Temperature High‐Performance Lithium‐Ion Batteries. Advanced Materials, 36(45). https://doi.org/10.1002/adma.202409838
Vancouver
Liu F, Wang J, Chen W, Yuan M, Wang Q, Ke R, et al. Polymer‐Ion Interaction Prompted Quasi‐Solid Electrolyte for Room‐Temperature High‐Performance Lithium‐Ion Batteries. Advanced Materials. 2024;36(45). doi:10.1002/adma.202409838
BibTeX
@article{Liu2024,
author = {Liu, Fangzheng and Wang, Jiayi and Chen, Wenyan and Yuan, Mingman and Wang, Qingrong and Ke, Ruohong and Zhang, Guangzhao and Chang, Jian and Wang, Chaoyang and Deng, Yonghong and Wang, Jun and Shao, Minhua},
title = {Polymer‐Ion Interaction Prompted Quasi‐Solid Electrolyte for Room‐Temperature High‐Performance Lithium‐Ion Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {45},
doi = {10.1002/adma.202409838}
}
EUVIMED