EUVIMEDEUVIMED entdecken
Crossref

A P‐Type Organic Dye as Interface Layer for Efficient and Stable Inverted Perovskite Solar Cells

Mingming Zhao, Limei Wu, Kun Gong, Weimin Gu, Peiqing Wei, Kejian Jiang, Dongzhi Liu, Xueqin Zhou

Small · 2026-04 · 22 (22)

DOI: 10.1002/smll.72953 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 26.02.2026. Verfasst von Mingming Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering and Technology, Tianjin University, Tianjin, P. R. China. Die Arbeit nennt 42 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Beijing Municipality.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nickel oxide (NiO x ) is a promising hole‐transport material widely used in inverted perovskite solar cells (PSCs) due to its high carrier mobility and good transparency. However, light‐induced degradation of the NiO x– perovskite heterojunction remains the main factor limiting the long‐term operational lifetime of these solar cells. In this study, a traditional p ‐type organic dye ( TPA‐CN ), commonly used in p ‐type NiO x dye‐sensitized solar cells, is employed as self‐assembled monolayer (SAM) molecules for interface modification between NiO x and perovskite in inverted PSCs. In TPA‐CN , carboxyl anchoring groups passivate Ni 3 + defects on NiO x and enhance hole extraction, while the cyano group passivates undercoordinated Pb 2 + in the buried perovskite layer, lowering trap density. Furthermore, TPA‐CN functions as an interfacial bridge, boosting charge transfer from the perovskite to NiO x , which improves both the performance and stability of perovskite solar cells (PSCs). As a result, TPA‐CN ‐modified devices achieve a peak power conversion efficiency (PCE) of 25.54%, compared to 21.80% for unmodified control devices. Notably, unencapsulated devices maintain 89.2% of their initial PCE after 1800 h under ambient conditions (ISOS‐D‐1) and 95.3% after 500 h of continuous 1‐sun illumination. This research presents an effective molecular design approach for developing high‐performance inverted PSCs using charge‐selective materials.

Schlagwörter

Stichwörter der Autor:innen

defect passivationinverted perovskite solar cellsp‐DSSCself‐assembled monolayers

Autor:innen und Institutionen

  • School of Chemical Engineering and Technology, Tianjin University, Tianjin, P. R. China.
  • Key Laboratory of Green Printing, Institute of Chemistry, CAS, Beijing, P. R. China.
  • College of Energy and Environmental Engineering, Hebei Key Laboratory of Air Pollution Cause and Impact, Hebei University of Engineering, Handan, P. R. China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Beijing Municipality

Zitieren

APA

Zhao, M., Wu, L., Gong, K., Gu, W., Wei, P., Jiang, K., Liu, D., & Zhou, X. (2026). A P‐Type Organic Dye as Interface Layer for Efficient and Stable Inverted Perovskite Solar Cells. Small, 22(22). https://doi.org/10.1002/smll.72953

Vancouver

Zhao M, Wu L, Gong K, Gu W, Wei P, Jiang K, et al. A P‐Type Organic Dye as Interface Layer for Efficient and Stable Inverted Perovskite Solar Cells. Small. 2026;22(22). doi:10.1002/smll.72953

BibTeX
@article{Zhao2026,
  author = {Zhao, Mingming and Wu, Limei and Gong, Kun and Gu, Weimin and Wei, Peiqing and Jiang, Kejian and Liu, Dongzhi and Zhou, Xueqin},
  title = {A P‐Type Organic Dye as Interface Layer for Efficient and Stable Inverted Perovskite Solar Cells},
  journal = {Small},
  year = {2026},
  volume = {22},
  number = {22},
  doi = {10.1002/smll.72953}
}
Kostenlos starten →