Buried Interface Dielectric Layer Engineering for Highly Efficient and Stable Inverted Perovskite Solar Cells and Modules
Advanced Science · 2023-07 · 10 (19)
DOI: 10.1002/advs.202300586 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 25.04.2023. Verfasst von Huan Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: SUSTech Energy Institute for Carbon Neutrality, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenz…. Die Arbeit wurde bisher 73-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Provincial Science and Technology Program, Shenzhen Science and Technology Program.
Abstract (Originalsprache)
Stability and scalability are essential and urgent requirements for the commercialization of perovskite solar cells (PSCs), which are retarded by the non‐ideal interface leading to non‐radiative recombination and degradation. Extensive efforts are devoted to reducing the defects at the perovskite surface. However, the effects of the buried interface on the degradation and non‐radiative recombination need to be further investigated. Herein, an omnibearing strategy to modify buried and top surfaces of perovskite film to reduce interfacial defects, by incorporating aluminum oxide (Al 2 O 3 ) as a dielectric layer and growth scaffolds (buried surface) and phenethylammonium bromide as a passivation layer (buried and top surfaces), is demonstrated. Consequently, the open‐circuit voltage is extensively boosted from 1.02 to 1.14 V with the incorporation of Al 2 O 3 filling the voids between grains, resulting in dense morphology of buried interface and reduced recombination centers. Finally, the impressive efficiencies of 23.1% (0.1 cm 2 ) and 22.4% (1 cm 2 ) are achieved with superior stability, which remain 96% (0.1 cm 2 ) and 89% (1 cm 2 ) of its initial performance after 1200 (0.1 cm 2 ) and 2500 h (1 cm 2 ) illumination, respectively. The dual modification provides a universal method to reduce interfacial defects, revealing a promising prospect in developing high‐performance PSCs and modules.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- SUSTech Energy Institute for Carbon Neutrality, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, 518055, China.
ORCID-Profile: Longbin Qiu
Förderung
- National Natural Science Foundation of China
- Guangdong Provincial Science and Technology Program
- Shenzhen Science and Technology Program
- Shenzhen municipal government
- Southern University of Science and Technology
Zitieren
APA
Li, H., Xie, G., Wang, X., Li, S., Lin, D., Fang, J., Wang, D., Huang, W., & Qiu, L. (2023). Buried Interface Dielectric Layer Engineering for Highly Efficient and Stable Inverted Perovskite Solar Cells and Modules. Advanced Science, 10(19). https://doi.org/10.1002/advs.202300586
Vancouver
Li H, Xie G, Wang X, Li S, Lin D, Fang J, et al. Buried Interface Dielectric Layer Engineering for Highly Efficient and Stable Inverted Perovskite Solar Cells and Modules. Advanced Science. 2023;10(19). doi:10.1002/advs.202300586
BibTeX
@article{Li2023,
author = {Li, Huan and Xie, Guanshui and Wang, Xin and Li, Sibo and Lin, Dongxu and Fang, Jun and Wang, Daozeng and Huang, Weixin and Qiu, Longbin},
title = {Buried Interface Dielectric Layer Engineering for Highly Efficient and Stable Inverted Perovskite Solar Cells and Modules},
journal = {Advanced Science},
year = {2023},
volume = {10},
number = {19},
doi = {10.1002/advs.202300586}
}
EUVIMED