EUVIMEDEUVIMED entdecken
Crossref

Synergistic Modulation of Buried Interface and 2D–3D Assisted Growth of Bulk via Surface‐Functionalized Layer Enables >85% Fill Factor in Inverted Perovskite Solar Cells

Himangshu Baishya iD, Ramkrishna Das Adhikari iD, Mayur Jagdishbhai Patel iD, Swastik Laha iD, Deepak Yadav iD, Kalishankar Bhattacharyya iD, Parameswar Krishnan Iyer iD

Small · 2025-10 · 21 (39)

DOI: 10.1002/smll.202507345 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 14.08.2025. Verfasst von Himangshu Baishya und 6 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: DST, India, Max-Planck-Gesellschaft, Department of Electronics and Information Technology, Ministry of Communications and Information Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The NiOx/perovskite buried interface critically influences the power conversion efficiency (PCE) and long‐term stability of perovskite solar cells (PSCs) due to high defect density, suboptimal charge transport and associated interfacial redox reactions. Herein, this study introduces interfacial molecular layers of 1‐(4‐cyanophenyl) guanidine hydrochloride (CPGH) and 4‐guanidinobenzoic acid hydrochloride (GBAH) onto NiOx. Theoretical calculations and experimental validation reveal the synergistic effect of functional groups in CPGH (─CN) and GBAH (─COOH) that interact with Ni > 3 ⁺ species and surface hydroxyls (─OH), effectively passivating redox‐active sites and improving the Ni 3 ⁺/Ni 2 ⁺ ratio. This passivation leads to a valence band downshift, enhancing hole extraction. Concurrently, the guanidine (─NH 2 ) groups interact with residual PbI 2 at the buried perovskite interface, promoting 2D perovskite formation, attained via cautious mechanical exfoliation which passivates Pb 2 ⁺ related defects and iodine vacancies, thereby reducing ion migration. The 2D PVSK further facilitates the growth of high‐quality 3D perovskite films with larger grains, lower defect density, and reduced residual stress, improving film morphology and optoelectronic properties. Consequently, the CPGH and GBAH treated devices achieve high fill factors (FF) of 85.5% and 82.9%, PCEs of 24.72% and 23.46%, respectively, compared to 80% FF and 21.79% PCE (control). Long‐term stability tests show PCE retention of >82% after 500 h of thermal aging and >87% after 2000 h of ambient exposure. These results underscore the critical role of buried interface engineering in device performance and stability.

Schlagwörter

Stichwörter der Autor:innen

buried interfacecharge transporthigh fill factorlow dimensional perovskitesurface functionalizationsynergistic modification

Autor:innen und Institutionen

  • Centre for Nanotechnology, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India.
  • Department of Chemistry, Indian Institute of Technology Guwahati, Guwahati, Assam, 781039, India.

ORCID-Profile: Himangshu Baishya, Ramkrishna Das Adhikari, Mayur Jagdishbhai Patel, Swastik Laha, Deepak Yadav, Kalishankar Bhattacharyya, Parameswar Krishnan Iyer

Förderung

  • DST, India
  • Max-Planck-Gesellschaft
  • Department of Electronics and Information Technology, Ministry of Communications and Information Technology
  • SPARC project
  • NECBH,IIT Guwahati
  • ANRF-PMECRG

Zitieren

APA

Baishya, H., Das Adhikari, R., Patel, M. J., Laha, S., Yadav, D., Bhattacharyya, K., & Iyer, P. K. (2025). Synergistic Modulation of Buried Interface and 2D–3D Assisted Growth of Bulk via Surface‐Functionalized Layer Enables >85% Fill Factor in Inverted Perovskite Solar Cells. Small, 21(39). https://doi.org/10.1002/smll.202507345

Vancouver

Baishya H, Das Adhikari R, Patel MJ, Laha S, Yadav D, Bhattacharyya K, et al. Synergistic Modulation of Buried Interface and 2D–3D Assisted Growth of Bulk via Surface‐Functionalized Layer Enables >85% Fill Factor in Inverted Perovskite Solar Cells. Small. 2025;21(39). doi:10.1002/smll.202507345

BibTeX
@article{Baishya2025,
  author = {Baishya, Himangshu and Das Adhikari, Ramkrishna and Patel, Mayur Jagdishbhai and Laha, Swastik and Yadav, Deepak and Bhattacharyya, Kalishankar and Iyer, Parameswar Krishnan},
  title = {Synergistic Modulation of Buried Interface and 2D–3D Assisted Growth of Bulk via Surface‐Functionalized Layer Enables >85% Fill Factor in Inverted Perovskite Solar Cells},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {39},
  doi = {10.1002/smll.202507345}
}
Kostenlos starten →