Buried‐Interface Engineering Enables Efficient and 1960‐Hour ISOS‐L‐2I Stable Inverted Perovskite Solar Cells
Advanced Materials · 2024-03 · 36 (13)
DOI: 10.1002/adma.202303869 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.12.2023. Verfasst von Lin Li und 15 weiteren Autor:innen. Beteiligte Einrichtung: Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuha…. Die Arbeit wurde bisher 86-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: Swiss National Science Foundation, National Key Research and Development Program of China, National Natural Science Foundation of China.
Abstract (Originalsprache)
High‐performance perovskite solar cells (PSCs) typically require interfacial passivation, yet this is challenging for the buried interface, owing to the dissolution of passivation agents during the deposition of perovskites. Here, this limitation is overcome with in situ buried‐interface passivation—achieved via directly adding a cyanoacrylic‐acid‐based molecular additive, namely BT‐T, into the perovskite precursor solution. Classical and ab initio molecular dynamics simulations reveal that BT‐T spontaneously may self‐assemble at the buried interface during the formation of the perovskite layer on a nickel oxide hole‐transporting layer. The preferential buried‐interface passivation results in facilitated hole transfer and suppressed charge recombination. In addition, residual BT‐T molecules in the perovskite layer enhance its stability and homogeneity. A power‐conversion efficiency (PCE) of 23.48% for 1.0 cm 2 inverted‐structure PSCs is reported. The encapsulated PSC retains 95.4% of its initial PCE following 1960 h maximum‐power‐point tracking under continuous light illumination at 65 °C (i.e., ISOS‐L‐2I protocol). The demonstration of operating‐stable PSCs under accelerated ageing conditions represents a step closer to the commercialization of this emerging technology.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Michael Grätzel Center for Mesoscopic Solar Cells, Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan, 430074, China.
- Beijing Academy of Science and Technology, Beijing, 100089, China.
- Laboratory of Photonics and Interfaces, Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, CH-1015, Switzerland.
- Laboratory of Computational Chemistry and Biochemistry, Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, CH-1015, Switzerland.
- School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Wuhan, 430070, China.
ORCID-Profile: Xiong Li
Förderung
- Swiss National Science Foundation
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
Zitieren
APA
Li, L., Wei, M., Carnevali, V., Zeng, H., Zeng, M., Liu, R., Lempesis, N., Eickemeyer, F. T., Luo, L., Agosta, L., Dankl, M., Zakeeruddin, S. M., Roethlisberger, U., Grätzel, M., Rong, Y., & Li, X. (2024). Buried‐Interface Engineering Enables Efficient and 1960‐Hour ISOS‐L‐2I Stable Inverted Perovskite Solar Cells. Advanced Materials, 36(13). https://doi.org/10.1002/adma.202303869
Vancouver
Li L, Wei M, Carnevali V, Zeng H, Zeng M, Liu R, et al. Buried‐Interface Engineering Enables Efficient and 1960‐Hour ISOS‐L‐2I Stable Inverted Perovskite Solar Cells. Advanced Materials. 2024;36(13). doi:10.1002/adma.202303869
BibTeX
@article{Li2024,
author = {Li, Lin and Wei, Mingyang and Carnevali, Virginia and Zeng, Haipeng and Zeng, Miaomiao and Liu, Ranran and Lempesis, Nikolaos and Eickemeyer, Felix Thomas and Luo, Long and Agosta, Lorenzo and Dankl, Mathias and Zakeeruddin, Shaik M and Roethlisberger, Ursula and Grätzel, Michael and Rong, Yaoguang and Li, Xiong},
title = {Buried‐Interface Engineering Enables Efficient and 1960‐Hour ISOS‐L‐2I Stable Inverted Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {13},
doi = {10.1002/adma.202303869}
}
EUVIMED