20.27% Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells Achieved by Halogen‐free Room‐Temperature Post‐treatment
Small · 2025-07 · 21 (27)
DOI: 10.1002/smll.202503174 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 04.06.2025. Verfasst von Wenfeng Liu und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, School of Optoelectronic Engineering, Engineering Research Center of Electronic Information Materials an…. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: The Guangxi Natural Science Foundation Program, National Natural Science Foundation of China, The Innovation Project of GUET Graduate Education.
Abstract (Originalsprache)
Defects at grain boundaries and energy level mismatch at the perovskite film/carbon electrode interface in printable mesoscopic perovskite solar cells (p‐MPSCs) lead to non‐radiative carrier recombination and large open‐circuit voltage ( V OC ) losses. Herein, a method for post‐treating perovskite films in p‐MPSCs at room‐temperature using halogen‐free aromatic amines, including Benzylamine (BA), 1‐Naphthalenemethylamine (NMA), and 1‐Naphthalenecarboximidamide (NFA), is reported. The halogen‐free aromatic amines prevent the formation of iodine vacancy defects in perovskite films by interacting with under‐coordinated Pb 2+ , significantly reducing the trap state density of the perovskite films. Meanwhile, the halogen‐free aromatic amines can form low‐dimensional perovskites with type II energy level alignment at the perovskite film/carbon electrode interface, which significantly suppresses non‐radiative recombination of interfacial carriers and reduces V OC loss. As a result, the champion power conversion efficiency (PCE) of p‐MPSCs based on NFA room‐temperature post‐treatment is improved from 17.51% in control devices to 20.27%, and the V OC is increased from 0.975 V in control devices to 1.049 V. Furthermore, the unencapsulated p‐MPSCs retained more than 95% of their initial PCE after being stored in air for 3500 h. The halogen‐free room‐temperature post‐treatment provides a simple and green approach for preparing high‐efficiency and stable p‐MPSCs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, School of Optoelectronic Engineering, Engineering Research Center of Electronic Information Materials and Devices, Ministry of Education, Guangxi Key Laboratory of Informatio…
ORCID-Profile: Yang Zhang, Jian Zhang
Förderung
- The Guangxi Natural Science Foundation Program
- National Natural Science Foundation of China
- The Innovation Project of GUET Graduate Education
Zitieren
APA
Liu, W., Zhang, Y., Chen, C., Xu, W., Zeng, Q., Yang, W., Chen, Y., Zhang, Z., Wang, D., & Zhang, J. (2025). 20.27% Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells Achieved by Halogen‐free Room‐Temperature Post‐treatment. Small, 21(27). https://doi.org/10.1002/smll.202503174
Vancouver
Liu W, Zhang Y, Chen C, Xu W, Zeng Q, Yang W, et al. 20.27% Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells Achieved by Halogen‐free Room‐Temperature Post‐treatment. Small. 2025;21(27). doi:10.1002/smll.202503174
BibTeX
@article{Liu2025,
author = {Liu, Wenfeng and Zhang, Yang and Chen, Changqing and Xu, Weiqiang and Zeng, Qin and Yang, Weihuang and Chen, Yiwen and Zhang, Zheling and Wang, Dongjie and Zhang, Jian},
title = {20.27% Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells Achieved by Halogen‐free Room‐Temperature Post‐treatment},
journal = {Small},
year = {2025},
volume = {21},
number = {27},
doi = {10.1002/smll.202503174}
}
EUVIMED