EUVIMEDEUVIMED entdecken
Crossref

In Situ Reconstruction Post‐Treatment for Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells

Chuanzhou Han, Jiankang Du, Zhiyang Liu, Qiaojiao Gao, Xiayan Chen, Junwei Xiang, Xufeng Xiao, Yanjie Cheng, Kai Chen, Minghao Xia, Jiale Liu, Li‐Ming Yang und 3 weitere

Advanced Functional Materials · 2024-11 · 34 (48)

DOI: 10.1002/adfm.202408686 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 27.08.2024. Verfasst von Chuanzhou Han und 14 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite solar cells are regarded as the most promising and disruptive photovoltaic of the new generation. Carbon‐based hole‐conductor‐free printable mesoscopic perovskite solar cells (p‐MPSCs) with three mesoscopic layers have garnered considerable interest owing to their simple manufacturing process and cost‐effective raw materials, signaling the potential for commercialization. However, the energy level mismatch between the perovskite and the carbon electrode as well as defects at perovskite grain boundaries inevitably lead to additional non‐radiative carrier recombination and large voltage loss. In this study, a facile in situ reconstruction post‐treatment approach is employed to integrate lead sulfide (PbS) and the two‐dimensional (2D) perovskite K 2 PbI 4 into the mesoporous scaffolds of p‐MPSCs. In this way, grain boundary defects are effectively passivated and the ion migration is suppressed by introducing 2D perovskite K 2 PbI 4 at grain boundaries. Besides, the incorporation of PbS leads to the downward shift of the Fermi level for perovskite, which enhances hole collection within the device by optimizing band alignment at the perovskite/carbon interface. Consequently, an improved efficiency exceeding 20% is achieved for p‐MPSCs with no significant performance degradation observed over a storage period of 235 days. This strategy provides a facile and novel approach toward fabricating highly efficient and stable p‐MPSCs.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Han, C., Du, J., Liu, Z., Gao, Q., Chen, X., Xiang, J., Xiao, X., Cheng, Y., Chen, K., Xia, M., Liu, J., Yang, L., Zhou, Y., Mei, A., & Han, H. (2024). In Situ Reconstruction Post‐Treatment for Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells. Advanced Functional Materials, 34(48). https://doi.org/10.1002/adfm.202408686

Vancouver

Han C, Du J, Liu Z, Gao Q, Chen X, Xiang J, et al. In Situ Reconstruction Post‐Treatment for Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells. Advanced Functional Materials. 2024;34(48). doi:10.1002/adfm.202408686

BibTeX
@article{Han2024,
  author = {Han, Chuanzhou and Du, Jiankang and Liu, Zhiyang and Gao, Qiaojiao and Chen, Xiayan and Xiang, Junwei and Xiao, Xufeng and Cheng, Yanjie and Chen, Kai and Xia, Minghao and Liu, Jiale and Yang, Li‐Ming and Zhou, Yang and Mei, Anyi and Han, Hongwei},
  title = {In Situ Reconstruction Post‐Treatment for Efficient Carbon‐Based Hole‐Conductor‐Free Printable Mesoscopic Perovskite Solar Cells},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {48},
  doi = {10.1002/adfm.202408686}
}
Kostenlos starten →