EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Superior Carbon Nanotube Field Emission for X‐Ray Source via Metal Silicide‐Induced Adhesion

Sayed Zafar Abbas iD, Jaehwi Lee, Syed Muhammad Zain Mehdi, Jaewon Cho, Ahmed Raza, Sungkyu Kim, Jeung Choon Goak, Naesung Lee

Small · 2025-08 · 21 (32)

DOI: 10.1002/smll.202500242 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 13.06.2025. Verfasst von Sayed Zafar Abbas und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Nanotechnology and Advanced Materials Engineering, Hybrid Materials Centre (HMC), Sejong University, Seoul, 05006, Republic of Korea. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon nanotube field emitters (CNT FEs) have obtained increasing attention for vacuum electronics devices such as cold cathode X‐ray tubes. However, the low adhesion of CNTs on the substrate thwarts their ability to achieve high field emission current density. To this end, the effects of Ni, Si, and Al 2 O 3 fillers on their adhesion both in the paste and onto the Kovar (nickel‐cobalt ferrous alloy) substrate are investigated. Chemical reactions between Ni, Si, and the Kovar constituents lead to the formation of micrometer‐sized protruding particles. Si fillers are key in promoting their formation in the paste and on the substrate. During high‐temperature vacuum annealing, the Si fillers reacted with the Ni fillers and the Kovar constituents, forming Ni 2 Si in the paste and Fe 2 NiSi on the substrate, both of which strengthened adhesion. The adhesion of CNT FEs with both Ni and Si fillers is better compared to those containing Ni or Si fillers alone. With the resulting retention of more CNTs on the substrate after tape activation, a current density of 30.9 A cm −2 and stable field emission for 14 h at 500 mA cm −2 are achieved, indicating the commercial potential of CNT FEs in vacuum electronics.

Schlagwörter

Stichwörter der Autor:innen

X‐ray sourceadhesioncarbon nanotubesfield emissionfillershigh current density

Autor:innen und Institutionen

  • Department of Nanotechnology and Advanced Materials Engineering, Hybrid Materials Centre (HMC), Sejong University, Seoul, 05006, Republic of Korea.
  • Graduate School of Optical Engineering, Sejong University, Seoul, 05006, Republic of Korea.

ORCID-Profile: Sayed Zafar Abbas

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Abbas, S. Z., Lee, J., Mehdi, S. M. Z., Cho, J., Raza, A., Kim, S., Goak, J. C., & Lee, N. (2025). Superior Carbon Nanotube Field Emission for X‐Ray Source via Metal Silicide‐Induced Adhesion. Small, 21(32). https://doi.org/10.1002/smll.202500242

Vancouver

Abbas SZ, Lee J, Mehdi SMZ, Cho J, Raza A, Kim S, et al. Superior Carbon Nanotube Field Emission for X‐Ray Source via Metal Silicide‐Induced Adhesion. Small. 2025;21(32). doi:10.1002/smll.202500242

BibTeX
@article{Abbas2025,
  author = {Abbas, Sayed Zafar and Lee, Jaehwi and Mehdi, Syed Muhammad Zain and Cho, Jaewon and Raza, Ahmed and Kim, Sungkyu and Goak, Jeung Choon and Lee, Naesung},
  title = {Superior Carbon Nanotube Field Emission for X‐Ray Source via Metal Silicide‐Induced Adhesion},
  journal = {Small},
  year = {2025},
  volume = {21},
  number = {32},
  doi = {10.1002/smll.202500242}
}
Kostenlos starten →