Deconstruction Engineering of Lignocellulose Toward High‐Plateau‐Capacity Hard Carbon Anodes for Sodium‐Ion Batteries
Small · 2024-12 · 20 (50)
DOI: 10.1002/smll.202405632 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 27.09.2024. Verfasst von Zongyi Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering and Light Industry, Guangdong University of Technology (GDUT), 100 Waihuan Xi Road, Panyu District, Guangzhou, 510006,…. Die Arbeit wurde bisher 148-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Research and Development Program in Key Fields of Guangdong Province, Open Foundation of Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and Molecular Engineering.
Abstract (Originalsprache)
Biomass‐derived hard carbon is a promising anode material for commercial sodium‐ion batteries due to its low cost, high capacity, and stable cycling performance. However, the intrinsic tight lignocellulosic structure in biomass hinders the formation of sufficient closed pores, limiting the specific capacity of obtained hard carbons. In this contribution, a mild, industrially mature pretreatment method is utilized to selectively regulate biomass components. The hard carbon with a rich closed pore structure is prepared by optimizing the appropriate ratio of biomass composition. Optimized etching conditions enhanced the closed pore volume of hard carbon from 0.15 to 0.26 cm 3 g −1 . Consequently, the engineered hard carbon exhibited excellent electrochemical performance, including a high reversible capacity of 346 mAh g −1 with a high plateau capacity of 254 mAh g⁻¹ at 50 mA g⁻¹, robust rate capability, and cycling stability. The optimized hard carbon shows an 88 mAh g⁻¹ increase in plateau capacity compared to hard carbon from directly carbonizing bamboo fibers. This mature approach provides an easy‐to‐operate industrial pathway for designing high‐capacity biomass‐based hard carbons for sodium‐ion batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical Engineering and Light Industry, Guangdong University of Technology (GDUT), 100 Waihuan Xi Road, Panyu District, Guangzhou, 510006, China.
- Guangdong Provincial Laboratory of Chemistry and Fine Chemical Engineering Jieyang Center, Jieyang, 515200, China.
- School of Advanced Manufacturing, Institute of Green Chemistry and Advanced Materials, Guangdong University of Technology, Jieyang, 515200, China.
- Guangdong Basic Research Center of Excellence for Ecological Security and Green Development, Guangdong University of Technology, Guangzhou, 510006, China.
- Shaoxing Research Institute of Renewable Energy and Molecular Engineering, Shanghai Jiao Tong University, Shaoxing, 312000, China.
ORCID-Profile: Wenli Zhang
Förderung
- National Natural Science Foundation of China
- Research and Development Program in Key Fields of Guangdong Province
- Open Foundation of Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and Molecular Engineering
- Shanghai Synchrotron Radiation Facility
- Guangdong-Hong Kong-Macao Joint Laboratory
Zitieren
APA
Huang, Z., Huang, J., Zhong, L., Zhang, W., & Qiu, X. (2024). Deconstruction Engineering of Lignocellulose Toward High‐Plateau‐Capacity Hard Carbon Anodes for Sodium‐Ion Batteries. Small, 20(50). https://doi.org/10.1002/smll.202405632
Vancouver
Huang Z, Huang J, Zhong L, Zhang W, Qiu X. Deconstruction Engineering of Lignocellulose Toward High‐Plateau‐Capacity Hard Carbon Anodes for Sodium‐Ion Batteries. Small. 2024;20(50). doi:10.1002/smll.202405632
BibTeX
@article{Huang2024,
author = {Huang, Zongyi and Huang, Jiahong and Zhong, Lei and Zhang, Wenli and Qiu, Xueqing},
title = {Deconstruction Engineering of Lignocellulose Toward High‐Plateau‐Capacity Hard Carbon Anodes for Sodium‐Ion Batteries},
journal = {Small},
year = {2024},
volume = {20},
number = {50},
doi = {10.1002/smll.202405632}
}
EUVIMED