Precursor-Level Structural Regulation of Hard Carbon Anodes Toward Advanced Sodium-Ion Batteries
ECS Meeting Abstracts · 07.07.2026 · MA2026-01 (4) · 599-599
DOI: 10.1149/ma2026-014599mtgabs ↗Kurz gefasst
Fachartikel in der Zeitschrift ECS Meeting Abstracts, erschienen am 07.07.2026. Verfasst von Eun-Hye Kim und 2 weiteren Autor:innen.
Abstract (Originalsprache)
Sodium-ion batteries (SIBs) are receiving increasing attention as promising next-generation energy storage systems owing to the natural abundance, low cost, and broad geographical distribution of sodium resources. As the commercialization of SIBs accelerates, the development of high-performance anode materials that simultaneously deliver high energy density, fast reaction kinetics, and long-term stability has become a critical challenge. Among the various anode candidates explored to date, hard carbon (HC) has emerged as the most practical and widely adopted material due to its intrinsically disordered structure, expanded interlayer spacing, and moderate sodium-storage capacity typically ranging from 250 to 300 mAh g⁻¹. The sodium-storage behavior of HC is generally characterized by two distinct regimes. The sloping voltage region above ~0.1 V is dominated by surface-controlled Na⁺ adsorption at defect-rich sites, heteroatom functionalities, and edge planes, which contributes to rapid reaction kinetics but is often accompanied by pronounced irreversible reactions. In contrast, the low-voltage plateau region below ~0.1 V is associated with quasi-metallic Na⁺ storage within internal closed pores, which is essential for achieving high energy density. Consequently, rationally regulating both the surface chemistry and internal microstructure of HC is crucial to simultaneously enhance energy density and rate capability while maintaining a high initial coulombic efficiency (ICE). Starch-derived HC has been extensively investigated as a sustainable anode material owing to its renewable nature, low cost, and high carbon yield. However, direct carbonization of starch commonly leads to severe structural collapse and poor microstructural controllability due to extensive volatilization and rapid depolymerization during thermal decomposition. These processes often result in irregular pore structures, excessive surface defects, and unstable carbon frameworks, ultimately compromising sodium-storage performance. To address these issues, various pretreatment strategies, including oxidative cross-linking and chemical modification, have been explored to stabilize the precursor structure prior to carbonization. Hydrothermal pretreatment has recently emerged as an effective approach to restructure biomass-derived precursors under confined aqueous environments, enabling controlled molecular rearrangement, dehydration, and condensation reactions. In particular, acid-assisted hydrothermal processes have demonstrated the ability to promote molecular cross-linking, suppress excessive volatilization, and regulate carbon microdomains, thereby facilitating the formation of stabilized frameworks with enhanced closed-pore structures. Such structural evolution has been shown to significantly improve low-voltage sodium storage associated with closed pores. However, enhancing sodium-storage kinetics in the higher-voltage region generally requires the introduction of additional electrochemically active sites, which often leads to aggravated electrolyte decomposition, excessive solid–electrolyte interphase (SEI) formation, and a consequent reduction in ICE. This intrinsic trade-off between reaction kinetics and reversibility remains a long-standing challenge in HC anode design. Herein, a generalized structural-engineering strategy is proposed that integrates molecular stabilization and electronic-structure modulation during precursor pretreatment using a mild and environmentally compatible oxidizing system. Unlike conventional oxidative treatments, this approach enables homogeneous molecular-level modification under hydrothermal conditions, leading to the formation of robust cross-linked networks while simultaneously introducing heteroatom-derived functionalities in a controlled manner. The synergistic effects of confined hydrothermal reactions and mild oxidation facilitate the stabilization of carbon skeletons, regulate the evolution of closed pores, and precisely tailor defect chemistry without inducing excessive surface reactivity. As a result, the derived hard carbon exhibits a well-balanced microstructure characterized by stabilized carbon domains, optimally regulated closed pores, and a moderate density of electrochemically active sites. These structural features effectively enhance low-voltage sodium storage while maintaining fast Na⁺ adsorption kinetics in the sloping region and suppressing irreversible interfacial reactions. Electrochemical evaluations demonstrate that the engineered hard carbon achieves simultaneous improvements in reversible capacity distribution, rate performance, and ICE, thereby overcoming the conventional trade-offs between energy density, power capability, and reversibility. Overall, this work presents a versatile and sustainable precursor-engineering pathway for advanced hard carbon anodes and provides new mechanistic insights into the rational regulation of structure–property relationships in biomass-derived carbons. The proposed strategy offers a broadly applicable framework for designing high-performance HC materials and accelerates the development of practical sodium-ion batteries for large-scale energy storage applications.
Zitieren
APA
Kim, E., Park, G., & Chun, J. (2026). Precursor-Level Structural Regulation of Hard Carbon Anodes Toward Advanced Sodium-Ion Batteries. ECS Meeting Abstracts, MA2026-01(4), 599-599. https://doi.org/10.1149/ma2026-014599mtgabs
Vancouver
Kim E, Park G, Chun J. Precursor-Level Structural Regulation of Hard Carbon Anodes Toward Advanced Sodium-Ion Batteries. ECS Meeting Abstracts. 2026;MA2026-01(4):599-599. doi:10.1149/ma2026-014599mtgabs
BibTeX
@article{Kim2026,
author = {Kim, Eun-Hye and Park, Gunhee and Chun, Jinyoung},
title = {Precursor-Level Structural Regulation of Hard Carbon Anodes Toward Advanced Sodium-Ion Batteries},
journal = {ECS Meeting Abstracts},
year = {2026},
volume = {MA2026-01},
number = {4},
pages = {599--599},
doi = {10.1149/ma2026-014599mtgabs}
}
EUVIMED