EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cation Modulation in AgSbTe 2 Realizes Carrier Optimization, Defect Engineering, and a 7% Single‐Leg Thermoelectric Efficiency

Bo-Chia Chen, Kuang-Kuo Wang, Hsin-Jay Wu iD

Small · 06.05.2024

DOI: 10.1002/smll.202401723 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 06.05.2024. Verfasst von Bo-Chia Chen und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, 30010, Taiwan. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council of Taiwa, National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AgSbTe 2 plays a pivotal role in mid‐temperature thermoelectric generators (TEGs). Leveraging the seminal advances in cation manipulation within AgSbTe 2 , this study demonstrates an enhanced TE power factor ( PF = S 2 σ ) of 1.5 mWm −1 K −2 and a peak zT of 1.5 at 583 K in an off‐stoichiometric Ag 1.04 Sb 0.96 Te 2 crystal. The introduction of Ge in place of Ag leads to an increased n H as evidenced by the detection of trace Ge 4+ through XPS analysis. Further chemical state analysis reveals the simultaneous presence of Ag + , Sb 3+ , and Ge 4+ , elucidating the effect of cation modulations. TEM characterizations validate the presence of superlattice structure, and the linear defects discerned within the AgSbTe 2 matrix. Consequently, the lattice thermal conductivity κ L is substantially reduced in the Ag 1.02 Ge 0.02 Sb 0.96 Te 2 crystal, yielding a peak zT of 1.77 at 623 K. This notable advancement is attributed to the counterbalance achieved between the enhanced PF and the reduced κ L , facilitated by cation modulation. Additionally, a single‐leg TE device incorporating Ag 1.02 Ge 0.02 Sb 0.96 Te 2 demonstrates a conversion efficiency of 7% across a temperature gradient (ΔT) of 350 K. This study corroborates the efficacy of cation modulation through thermodynamic approaches and establishes a relationship between transport properties and the presence of defects.

Schlagwörter

Stichwörter der Autor:innen

AgSbTe2cation modulationsdefectssingle‐leg devicethermoelectric generators

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Yang Ming Chiao Tung University, Hsinchu, 30010, Taiwan.
  • Department of Materials and Optoelectronic Science, National Sun Yat-sen University, Kaohsiung, 80424, Taiwan.

ORCID-Profile: Hsin-Jay Wu

Förderung

  • National Science and Technology Council of Taiwa
  • National Science and Technology Council

Zitieren

APA

Chen, B. C., Wang, K. K., & Wu, H. J. (2024). Cation Modulation in AgSbTe 2 Realizes Carrier Optimization, Defect Engineering, and a 7% Single‐Leg Thermoelectric Efficiency. Small. https://doi.org/10.1002/smll.202401723

Vancouver

Chen BC, Wang KK, Wu HJ. Cation Modulation in AgSbTe 2 Realizes Carrier Optimization, Defect Engineering, and a 7% Single‐Leg Thermoelectric Efficiency. Small. 2024. doi:10.1002/smll.202401723

BibTeX
@article{Chen2024,
  author = {Chen, Bo-Chia and Wang, Kuang-Kuo and Wu, Hsin-Jay},
  title = {Cation Modulation in AgSbTe 2 Realizes Carrier Optimization, Defect Engineering, and a 7% Single‐Leg Thermoelectric Efficiency},
  journal = {Small},
  year = {2024},
  doi = {10.1002/smll.202401723}
}
Kostenlos starten →