Defect‐Engineering‐Stabilized AgSbTe 2 with High Thermoelectric Performance
Advanced Materials · 2023-03 · 35 (11)
DOI: 10.1002/adma.202208994 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 05.02.2023. Verfasst von Yu Zhang und 17 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA. Die Arbeit wurde bisher 125-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: SBIR, Office of Naval Research, NSF.
Abstract (Originalsprache)
Thermoelectric (TE) generators enable the direct and reversible conversion between heat and electricity, providing applications in both refrigeration and power generation. In the last decade, several TE materials with relatively high figures of merit ( zT ) have been reported in the low‐ and high‐temperature regimes. However, there is an urgent demand for high‐performance TE materials working in the mid‐temperature range (400–700 K). Herein, p‐type AgSbTe 2 materials stabilized with S and Se co‐doping are demonstrated to exhibit an outstanding maximum figure of merit ( zT max ) of 2.3 at 673 K and an average figure of merit ( zT ave ) of 1.59 over the wide temperature range of 300–673 K. This exceptional performance arises from an enhanced carrier density resulting from a higher concentration of silver vacancies, a vastly improved Seebeck coefficient enabled by the flattening of the valence band maximum and the inhibited formation of n‐type Ag 2 Te, and ahighly improved stability beyond 673 K. The optimized material is used to fabricate a single‐leg device with efficiencies up to 13.3% and a unicouple TE device reaching energy conversion efficiencies up to 12.3% at a temperature difference of 370 K. These results highlight an effective strategy to engineer high‐performance TE material in the mid‐temperature range.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.
- Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA.
- Department of Materials Science and Engineering, Faculty of Engineering, İzmir Institute of Technology, İzmir, 35430, Turkey.
- U.S. Army Combat Capabilities Development Command Aviation & Missile Center, Redstone Arsenal, AL, 35898, USA.
- Catalonia Institute for Energy Research - IREC, Sant Adrià de Besòs, Barcelona, Catalonia, 08930, Spain.
- ICREA, Pg. Lluis Companys, Barcelona, Catalonia, 08010, Spain.
ORCID-Profile: Yu Zhang
Förderung
- SBIR
- Office of Naval Research
- NSF
- Norfolk State University U.S. Department of Commerce
- National Institute of Standards and Technology
- Center for Hierarchical Materials Design
- Army RIF program
- Small Business Innovation Research
Zitieren
APA
Zhang, Y., Li, Z., Singh, S., Nozariasbmarz, A., Li, W., Genç, A., Xia, Y., Zheng, L., Lee, S. H., Karan, S. K., Goyal, G. K., Liu, N., Mohan, S. M., Mao, Z., Cabot, A., Wolverton, C., Poudel, B., & Priya, S. (2023). Defect‐Engineering‐Stabilized AgSbTe 2 with High Thermoelectric Performance. Advanced Materials, 35(11). https://doi.org/10.1002/adma.202208994
Vancouver
Zhang Y, Li Z, Singh S, Nozariasbmarz A, Li W, Genç A, et al. Defect‐Engineering‐Stabilized AgSbTe 2 with High Thermoelectric Performance. Advanced Materials. 2023;35(11). doi:10.1002/adma.202208994
BibTeX
@article{Zhang2023,
author = {Zhang, Yu and Li, Zhi and Singh, Saurabh and Nozariasbmarz, Amin and Li, Wenjie and Genç, Aziz and Xia, Yi and Zheng, Luyao and Lee, Seng Huat and Karan, Sumanta Kumar and Goyal, Gagan K and Liu, Na and Mohan, Sanghadasa Mf and Mao, Zhiqiang and Cabot, Andreu and Wolverton, Christopher and Poudel, Bed and Priya, Shashank},
title = {Defect‐Engineering‐Stabilized AgSbTe 2 with High Thermoelectric Performance},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {11},
doi = {10.1002/adma.202208994}
}
EUVIMED