EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of the Form Factors of Advanced Li‐S Pouch Cells

Sayan Das iD, Msa Bhuyan, Krish Naresh Gupta, Omena Okpowe, Austin Choi, Jeremiah Sweeny, David Olawale, Vilas G Pol iD

Small · 2024-08 · 20 (31)

DOI: 10.1002/smll.202311850 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Small, online erschienen am 06.03.2024. Verfasst von Sayan Das und 7 weiteren Autor:innen. Beteiligte Einrichtung: Davidson School of Chemical Engineering, Purdue University, West Lafayette, IN, 47907, USA. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium‐sulfur (Li‐S) batteries hold immense promise as next‐generation energy storage due to their high theoretical energy density (2600 Wh kg⁻¹), low cost, and non‐toxic nature. However, practical implementation faces challenges, primarily from Li polysulfide (LiPS) shuttling within the cathode and Li dendrite growth at the anode. Optimized electrodes/electrolytes design effectively confines LiPS to the cathode, boosting cycling performance in coin cells to up to hundreds of cycles. Scaling up to larger pouch cells presents new obstacles, requiring further research for long‐term stability. A 1.45 Ah pouch cell, with optimized sulfur loading and electrolyte/sulfur ratio is developed, which delivers an energy density of 151 Wh kg −1 with 70% capacity retention up to 100 cycles. Targeting higher energy density (180 Wh kg −1 ), the developed 1Ah pouch cell exhibits 68% capacity retention after 50 cycles. Morphological analysis reveals that pouch cell failure is primarily from Li metal powdering and resulting polarization, rather than LiPS shuttling. This occurs for continuous Li ion stripping/plating during cycling, leading to dendrite growth and formation of non‐reactive Li powder, especially under high currents. These issues increase ion diffusion resistance and reduce coulombic efficiency over time. Therefore, the study highlights the importance of a protected Li metal anode for achieving high‐energy‐dense batteries.

Schlagwörter

Stichwörter der Autor:innen

Li‐S batteriesdroneenergy densitylithium sulfurpolysulfidespouch cell

Autor:innen und Institutionen

  • Davidson School of Chemical Engineering, Purdue University, West Lafayette, IN, 47907, USA.
  • Valgotech LLC, 11079 Village Square LN, Fishers, IN, 46038, USA.
  • School of Materials Science and Engineering, Purdue University, West Lafayette, IN, 47907, USA.

ORCID-Profile: Sayan Das, Vilas G Pol

Förderung

  • National Science Foundation

Zitieren

APA

Das, S., Bhuyan, M., Gupta, K. N., Okpowe, O., Choi, A., Sweeny, J., Olawale, D., & Pol, V. G. (2024). Optimization of the Form Factors of Advanced Li‐S Pouch Cells. Small, 20(31). https://doi.org/10.1002/smll.202311850

Vancouver

Das S, Bhuyan M, Gupta KN, Okpowe O, Choi A, Sweeny J, et al. Optimization of the Form Factors of Advanced Li‐S Pouch Cells. Small. 2024;20(31). doi:10.1002/smll.202311850

BibTeX
@article{Das2024,
  author = {Das, Sayan and Bhuyan, Msa and Gupta, Krish Naresh and Okpowe, Omena and Choi, Austin and Sweeny, Jeremiah and Olawale, David and Pol, Vilas G},
  title = {Optimization of the Form Factors of Advanced Li‐S Pouch Cells},
  journal = {Small},
  year = {2024},
  volume = {20},
  number = {31},
  doi = {10.1002/smll.202311850}
}
Kostenlos starten →