Air‐Stable Li 2 S Cathodes Enabled by an In Situ‐Formed Li + Conductor for Graphite‐Li 2 S Pouch Cells
Advanced Materials · 2024-04 · 36 (14)
DOI: 10.1002/adma.202310756 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.01.2024. Verfasst von Xiaoqun Qi und 12 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science a…. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Using Li 2 S cathodes instead of S cathodes presents an opportunity to pair them with Li‐free anodes (e.g., graphite), thereby circumventing anode‐related issues, such as poor reversibility and safety, encountered in Li‐S batteries. However, the moisture‐sensitive nature of Li 2 S causes the release of hazardous H 2 S and the formation of insulative by‐products, increasing the manufacturing difficulty and adversely affecting cathode performance. Here, Li 4 SnS 4 , a Li + conductor that is air‐stable according to the hard–soft acid–base principle, is formed in situ and uniformly on Li 2 S particles because Li 2 S itself participates in Li 4 SnS 4 formation. When exposed to air (20% relative humidity), the protective Li 4 SnS 4 layer maintains its components and structure, thus contributing to the enhanced stability of the Li 2 S@Li 4 SnS 4 composite. In addition, the Li 4 SnS 4 layer can accelerate the sluggish conversion of Li 2 S because of its favorable interfacial charge transfer, and continuously confine lithium polysulfides owing to its integrity during electrochemical processes. A graphite‐Li 2 S pouch cell containing a Li 2 S@Li 4 SnS 4 cathode is constructed, which shows stable cyclability with 97% capacity retention after 100 cycles. Hence, combining a desirable air‐stable Li 2 S cathode and a highly reversible Li‐free configuration offers potential practical applications of graphite‐Li 2 S full cells.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, China.
ORCID-Profile: Long Qie
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- National Key Research and Development Program of China
Zitieren
APA
Qi, X., Jin, X., Xu, H., Pan, Y., Yang, F., Zhu, Z., Ji, J., Jiang, R., Du, H., Ji, Y., Yang, D., Qie, L., & Huang, Y. (2024). Air‐Stable Li 2 S Cathodes Enabled by an In Situ‐Formed Li + Conductor for Graphite‐Li 2 S Pouch Cells. Advanced Materials, 36(14). https://doi.org/10.1002/adma.202310756
Vancouver
Qi X, Jin X, Xu H, Pan Y, Yang F, Zhu Z, et al. Air‐Stable Li 2 S Cathodes Enabled by an In Situ‐Formed Li + Conductor for Graphite‐Li 2 S Pouch Cells. Advanced Materials. 2024;36(14). doi:10.1002/adma.202310756
BibTeX
@article{Qi2024,
author = {Qi, Xiaoqun and Jin, Xiaoyu and Xu, Henghui and Pan, Yujun and Yang, Fengyi and Zhu, Zhenglu and Ji, Jie and Jiang, Ruining and Du, Haoran and Ji, Yongsheng and Yang, Dan and Qie, Long and Huang, Yunhui},
title = {Air‐Stable Li 2 S Cathodes Enabled by an In Situ‐Formed Li + Conductor for Graphite‐Li 2 S Pouch Cells},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {14},
doi = {10.1002/adma.202310756}
}
EUVIMED