In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode by Interior and Exterior Decoration Strategy
Small · 2024-02 · 20 (5)
DOI: 10.1002/smll.202305618 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 27.09.2023. Verfasst von Zhouliang Tan und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgy and Environment, Central South University, Changsha, 410083, P. R. China. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: Central South University Innovation-Driven Research Programme, Natural Science Foundation of Hunan Province China, National Natural Science Foundation of China.
Abstract (Originalsprache)
Planar gliding along with anisotropic lattice strain of single‐crystalline nickel‐rich cathodes (SCNRC) at highly delithiated states will induce severe delamination cracking that seriously deteriorates LIBs’ cyclability. To address these issues, a novel lattice‐matched MgTiO 3 (MTO) layer, which exhibits same lattice structure as Ni‐rich cathodes, is rationally constructed on single‐crystalline LiNi 0.9 Co 0.05 Mn 0.05 O 2 (SC90) for ultrastable mechanical integrity. Intensive in/ex situ characterizations combined with theoretical calculations and finite element analysis suggest that the uniform MTO coating layer prevents direct contact between SC90 and organic electrolytes and enables rapid Li‐ion diffusion with depressed Li‐deficiency, thereby stabilizing the interfacial structure and accommodating the mechanical stress of SC90. More importantly, a superstructure is simultaneously formed in SC90, which can effectively alleviate the anisotropic lattice changes and decrease cation mobility during successive high‐voltage de/intercalation processes. Therefore, the as‐acquired MTO‐modified SC90 cathode displays desirable capacity retention and high‐voltage stability. When paired with commercial graphite anodes, the pouch‐type cells with the MTO‐modified SC90 can deliver a high capacity of 175.2 mAh g −1 with 89.8% capacity retention after 500 cycles. This lattice‐matching coating strategy demonstrate a highly effective pathway to maintain the structural and interfacial stability in electrode materials, which can be a pioneering breakthrough in commercialization of Ni‐rich cathodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Metallurgy and Environment, Central South University, Changsha, 410083, P. R. China.
- Engineering Research Center of the Ministry of Education for Advanced Battery Materials, Central South University, Changsha, 410083, China.
- Changsha Research Institute of Mining and Metallurgy, Changsha, 410083, P. R. China.
ORCID-Profile: Zhenjiang He
Förderung
- Central South University Innovation-Driven Research Programme
- Natural Science Foundation of Hunan Province China
- National Natural Science Foundation of China
- Government of Chongzuo, Guangxi Zhuang Autonomous Region
Zitieren
APA
Tan, Z., Li, Y., Lei, C., Li, Y., Xi, X., Jiang, S., Wu, F., & He, Z. (2024). In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode by Interior and Exterior Decoration Strategy. Small, 20(5). https://doi.org/10.1002/smll.202305618
Vancouver
Tan Z, Li Y, Lei C, Li Y, Xi X, Jiang S, et al. In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode by Interior and Exterior Decoration Strategy. Small. 2024;20(5). doi:10.1002/smll.202305618
BibTeX
@article{Tan2024,
author = {Tan, Zhouliang and Li, Yunjiao and Lei, Changlong and Li, Yue and Xi, Xiaoming and Jiang, Shijie and Wu, Feixiang and He, Zhenjiang},
title = {In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi 0.9 Co 0.05 Mn 0.05 O 2 Cathode by Interior and Exterior Decoration Strategy},
journal = {Small},
year = {2024},
volume = {20},
number = {5},
doi = {10.1002/smll.202305618}
}
EUVIMED