How to select the most relevant 3D roughness parameters of a surface
Scanning · 2014-01 · 36 (1) · 150-160
DOI: 10.1002/sca.21113 ↗Kurz gefasst
Fachartikel in der Zeitschrift Scanning, online erschienen am 22.08.2013. Verfasst von R Deltombe und 2 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire LAMIH CNRS UMR, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes Cedex, France. Die Arbeit wurde bisher 163-mal zitiert (Crossref) und nennt 26 Literaturangaben. Gefördert von: Picardie on the project FoncRug3D.
Abstract (Originalsprache)
In order to conduct a comprehensive roughness analysis, around sixty 3D roughness parameters are created to describe most of the surface morphology with regard to specific functions, properties or applications. In this paper, a multiscale surface topography decomposition method is proposed with application to stainless steel (AISI 304), which is processed by rolling at different fabrication stages and by electrical discharge tool machining. Fifty‐six 3D‐roughness parameters defined in ISO, EUR, and ASME standards are calculated for the measured surfaces. Then, expert software “MesRug” is employed to perform statistical analysis on acquired data in order to find the most relevant parameters characterizing the effect of both processes (rolling and machining), and to determine the most appropriate scale of analysis. For the rolling process: The parameter V mc (the Core Material Volume—defined as volume of material comprising the texture between heights corresponding to the material ratio values of p = 10% and q = 80%) computed at the scale of 3 µm is the most relevant parameter to characterize the cold rolling process. For the EDM Process, the best roughness parameter is S PD that represents the number of peaks per unit area after segmentation of a surface into motifs computed at the scale of 8 µm. SCANNING 36:150–160, 2014. © 2013 Wiley Periodicals, Inc.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratoire LAMIH CNRS UMR, Université de Valenciennes et du Hainaut-Cambrésis, Valenciennes Cedex, France.
Förderung
- Picardie on the project FoncRug3D
Zitieren
APA
Deltombe, R., Kubiak, K. J., & Bigerelle, M. (2014). How to select the most relevant 3D roughness parameters of a surface. Scanning, 36(1), 150-160. https://doi.org/10.1002/sca.21113
Vancouver
Deltombe R, Kubiak KJ, Bigerelle M. How to select the most relevant 3D roughness parameters of a surface. Scanning. 2014;36(1):150-160. doi:10.1002/sca.21113
BibTeX
@article{Deltombe2014,
author = {Deltombe, R and Kubiak, K J and Bigerelle, M},
title = {How to select the most relevant 3D roughness parameters of a surface},
journal = {Scanning},
year = {2014},
volume = {36},
number = {1},
pages = {150--160},
doi = {10.1002/sca.21113}
}
EUVIMED