EUVIMEDEUVIMED entdecken
Crossref

A Robotic Laparoscope Holder With High Bending Curvature Based on an Origami Metamaterial

Haixin Zhao iD, Jinhua Li iD, Yue Yu, Qiqiang Sun, Zhaoyao Wang iD, Shuai Zeng, Lizhi Pan, Jianchang Zhao iD

The International Journal of Medical Robotics and Computer Assisted Surgery · 2026-12 · 22 (6)

DOI: 10.1002/rcs.70250 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Medical Robotics and Computer Assisted Surgery, online erschienen am 30.10.2026. Verfasst von Haixin Zhao und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Tianjin University, Tianjin, China. Hauptthemen laut MEDLINE: Robotic Surgical Procedures, Laparoscopes, Laparoscopy. Die Arbeit nennt 45 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Emerging Frontiers Cultivation Program of Tianjin University Interdisciplinary Center.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Robotic laparoscope holders offer stable visualisation and reduce operator fatigue, thereby enhancing surgical efficiency. Flexible endoscopes provide better manoeuverability than rigid ones but struggle to achieve large bending in confined abdominal spaces.

Methods

This study proposes a robotic laparoscope holder with high bending curvature based on an origami metamaterial composed of serially connected spatial bending units and umbrella‐like motion components. The bending motion is achieved through rotational coupling between linkages, without cable actuation. A prototype was fabricated to experimentally validate the feasibility of the proposed mechanism.

Results

Experimental results show that the proposed robotic laparoscope holder can achieve a bending range exceeding 240 within an effective bending length of approximately 29 mm, with a maximum positional error of around 2.5 mm and a payload capacity of 200 g.

Conclusions

This design provides surgeons with enhanced operational flexibility and stable visualisation, demonstrating strong potential for laparoscopic surgery applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Robotic Surgical ProceduresLaparoscopesLaparoscopyEquipment DesignHumansMotion

Stichwörter der Autor:innen

continuum manipulatormechanism designminimally invasive surgeryorigami metamaterialrobotic laparoscope holder

Autor:innen und Institutionen

  • School of Mechanical Engineering, Tianjin University, Tianjin, China.

ORCID-Profile: Haixin Zhao, Jinhua Li, Zhaoyao Wang, Jianchang Zhao

Förderung

  • National Natural Science Foundation of China
  • Emerging Frontiers Cultivation Program of Tianjin University Interdisciplinary Center

Zitieren

APA

Zhao, H., Li, J., Yu, Y., Sun, Q., Wang, Z., Zeng, S., Pan, L., & Zhao, J. (2026). A Robotic Laparoscope Holder With High Bending Curvature Based on an Origami Metamaterial. The International Journal of Medical Robotics and Computer Assisted Surgery, 22(6). https://doi.org/10.1002/rcs.70250

Vancouver

Zhao H, Li J, Yu Y, Sun Q, Wang Z, Zeng S, et al. A Robotic Laparoscope Holder With High Bending Curvature Based on an Origami Metamaterial. The International Journal of Medical Robotics and Computer Assisted Surgery. 2026;22(6). doi:10.1002/rcs.70250

BibTeX
@article{Zhao2026,
  author = {Zhao, Haixin and Li, Jinhua and Yu, Yue and Sun, Qiqiang and Wang, Zhaoyao and Zeng, Shuai and Pan, Lizhi and Zhao, Jianchang},
  title = {A Robotic Laparoscope Holder With High Bending Curvature Based on an Origami Metamaterial},
  journal = {The International Journal of Medical Robotics and Computer Assisted Surgery},
  year = {2026},
  volume = {22},
  number = {6},
  doi = {10.1002/rcs.70250}
}
Kostenlos starten →