EUVIMEDEUVIMED entdecken
Crossref

A Cable‐Driven Wearable Robot Design for Multi‐Needle Positioning and Manipulation

Zhen Wang, Renjie Lu, Fan Wei, Shilun Du, Mengruo Shen, Yong Lei iD

The International Journal of Medical Robotics and Computer Assisted Surgery · 2026-04 · 22 (2)

DOI: 10.1002/rcs.70171 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Medical Robotics and Computer Assisted Surgery, online erschienen am 20.04.2026. Verfasst von Zhen Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, China. Hauptthemen laut MEDLINE: Needles, Robotic Surgical Procedures, Wearable Electronic Devices, Robotics. Die Arbeit nennt 47 Literaturangaben. Gefördert von: National Key R\&D Program: Development and Verification of Specific Single-port Robotic Sysntem for Caridiac Surgery.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Multi‐needle puncture is essential for clinical procedures such as multi‐target biopsy. However, existing robotic systems face the challenge of providing simultaneous 6‐DoF multi‐needle control while maintaining CT/MRI compatibility.

Methods

This paper presents a cable‐driven wearable robot for the manipulation of multiple needles, which integrates a 4‐DoF parallel module for needle positioning, a miniaturized 2‐DoF puncture module for individual steering, and a dual‐stiffness mounting module for rapid and stable installation. A hybrid cable‐driven transmission combined with non‐metallic materials ensures CT/MRI compatibility. A prototype was developed for the dual‐needle case, and kinematic models were established for accurate closed‐loop control.

Results

The prototype demonstrated a static positioning accuracy below 0.5 mm, a maximum puncture force of 10.2 N, and a torque of 2.5 N mm.

Conclusion

The proposed design is validated by a prototype capable of accurate multi‐needle positioning and manipulation while maintaining full MRI/CT compatibility.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

NeedlesRobotic Surgical ProceduresWearable Electronic DevicesRoboticsEquipment DesignHumansMagnetic Resonance ImagingTomography, X-Ray ComputedBiomechanical PhenomenaTorquePunctures

Stichwörter der Autor:innen

MRI/CT‐compatiblecable‐drivenmulti‐needlerobotic needle interventionwearable robot

Autor:innen und Institutionen

  • State Key Laboratory of Fluid Power and Mechatronic Systems, School of Mechanical Engineering, Zhejiang University, Hangzhou, China.

ORCID-Profile: Yong Lei

Förderung

  • National Key R\&D Program: Development and Verification of Specific Single-port Robotic Sysntem for Caridiac Surgery

Zitieren

APA

Wang, Z., Lu, R., Wei, F., Du, S., Shen, M., & Lei, Y. (2026). A Cable‐Driven Wearable Robot Design for Multi‐Needle Positioning and Manipulation. The International Journal of Medical Robotics and Computer Assisted Surgery, 22(2). https://doi.org/10.1002/rcs.70171

Vancouver

Wang Z, Lu R, Wei F, Du S, Shen M, Lei Y. A Cable‐Driven Wearable Robot Design for Multi‐Needle Positioning and Manipulation. The International Journal of Medical Robotics and Computer Assisted Surgery. 2026;22(2). doi:10.1002/rcs.70171

BibTeX
@article{Wang2026,
  author = {Wang, Zhen and Lu, Renjie and Wei, Fan and Du, Shilun and Shen, Mengruo and Lei, Yong},
  title = {A Cable‐Driven Wearable Robot Design for Multi‐Needle Positioning and Manipulation},
  journal = {The International Journal of Medical Robotics and Computer Assisted Surgery},
  year = {2026},
  volume = {22},
  number = {2},
  doi = {10.1002/rcs.70171}
}
Kostenlos starten →