EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Formation of L1 2 ‐Al 3 Ti Precipitates Enabling High Strength and Toughness in Oscillating Laser‐Welded Aluminum Alloy

Zhongping Hou, Yunfei Meng, Yuhui Xie, Jiaxing Li, Jingzhen Kuang, Qianxi Yu, Zongtao Zhu, Yan Liu, Hui Chen

Rare Metals · 2026-10 · 45 (10)

DOI: 10.1002/rar2.70616 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rare Metals, online erschienen am 02.10.2026. Verfasst von Zhongping Hou und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A synergistic strategy combining a Ti interlayer and circular beam oscillation was proposed to improve the laser weldability of 6082‐T6 aluminum alloy. The Ti interlayer suppressed porosity, eliminated columnar grains, and significantly reduced grain size by 67.7% at the weld center. Mechanistically, fine L1 2 ‐Al 3 Ti precipitates clearly showing a strong crystallographic orientation relationship with the α‐Al matrix, acted as efficient heterogeneous nucleation sites during solidification. Consequently, the ultimate tensile strength of the welded joint increased from 200 to 250 MPa, and the elongation remarkably improved by 176%. In situ computed tomography and scanning electron microscopy further revealed that Ti in situ alloying mitigated the detrimental effect of pores and enabled Al 3 Ti to function as a deformable precipitate, simultaneously enhancing the strength and ductility of the weld. This work demonstrates the formation of coherent L1 2 ‐Al 3 Ti precipitates via Ti in situ alloying and reveals a pore‐tolerant microstructure governed fracture mechanism, allowing the weld to achieve near base metal strength with excellent ductility.

Zitieren

APA

Hou, Z., Meng, Y., Xie, Y., Li, J., Kuang, J., Yu, Q., Zhu, Z., Liu, Y., & Chen, H. (2026). In Situ Formation of L1 2 ‐Al 3 Ti Precipitates Enabling High Strength and Toughness in Oscillating Laser‐Welded Aluminum Alloy. Rare Metals, 45(10). https://doi.org/10.1002/rar2.70616

Vancouver

Hou Z, Meng Y, Xie Y, Li J, Kuang J, Yu Q, et al. In Situ Formation of L1 2 ‐Al 3 Ti Precipitates Enabling High Strength and Toughness in Oscillating Laser‐Welded Aluminum Alloy. Rare Metals. 2026;45(10). doi:10.1002/rar2.70616

BibTeX
@article{Hou2026,
  author = {Hou, Zhongping and Meng, Yunfei and Xie, Yuhui and Li, Jiaxing and Kuang, Jingzhen and Yu, Qianxi and Zhu, Zongtao and Liu, Yan and Chen, Hui},
  title = {In Situ Formation of L1 2 ‐Al 3 Ti Precipitates Enabling High Strength and Toughness in Oscillating Laser‐Welded Aluminum Alloy},
  journal = {Rare Metals},
  year = {2026},
  volume = {45},
  number = {10},
  doi = {10.1002/rar2.70616}
}
Kostenlos starten →