Effect of Interlayer Pause on the Microstructure and Mechanical Properties of TiB2/6061 Alloy Fabricated by Selective Laser Melting
physica status solidi (a) · 22.05.2026 · 223 (10)
DOI: 10.1002/pssa.70370 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 13.05.2026. Verfasst von Xu Huang und 7 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben.
Abstract (Originalsprache)
The selective laser melting of 6061 aluminum alloy is often plagued by defects such as porosity, cracking, and coarse columnar grains due to thermal accumulation, which severely limits its mechanical performance and application. This study employed an interlayer pause strategy to control defects and microstructural evolution. The results demonstrate that the interlayer pause (IP) strategy effectively reduces the interlayer temperature and increases the temperature gradient at the molten pool bottom, leading to a shallower pool morphology and decreased melt fluidity. Consequently, the average defect area fraction was reduced from 7.13% to 1.28%, with a suppression effect exceeding 90% for highly defective samples. Under optimal processing conditions, the average grain size was refined to 22.7 μm, accompanied by a significant increase in the equiaxed grain fraction and a marked weakening of texture, as evidenced by a decrease in the maximum pole density from 3.54 to 2.46. Residual stress was also reduced by 36.7%. Mechanically, the yield strength and ultimate tensile strength increased by 12.5% and 10.2%, respectively, albeit with a slight decrease in elongation to 5.35%. The interlayer pause strategy exhibits good universality across different processing parameters, providing an effective pathway for high‐performance additive manufacturing of aluminum alloys.
Zitieren
APA
Huang, X., He, K., Lin, C., Qin, S., Huang, W., Chu, S., Xiao, Y., & Liu, H. (2026). Effect of Interlayer Pause on the Microstructure and Mechanical Properties of TiB2/6061 Alloy Fabricated by Selective Laser Melting. physica status solidi (a), 223(10). https://doi.org/10.1002/pssa.70370
Vancouver
Huang X, He K, Lin C, Qin S, Huang W, Chu S, et al. Effect of Interlayer Pause on the Microstructure and Mechanical Properties of TiB2/6061 Alloy Fabricated by Selective Laser Melting. physica status solidi (a). 2026;223(10). doi:10.1002/pssa.70370
BibTeX
@article{Huang2026,
author = {Huang, Xu and He, Kunhan and Lin, Chengqi and Qin, Shuaishuai and Huang, Weidong and Chu, Senqiang and Xiao, Yanping and Liu, Huabin},
title = {Effect of Interlayer Pause on the Microstructure and Mechanical Properties of TiB2/6061 Alloy Fabricated by Selective Laser Melting},
journal = {physica status solidi (a)},
year = {2026},
volume = {223},
number = {10},
doi = {10.1002/pssa.70370}
}
EUVIMED