EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research Progress on the Microstructure, Mechanical Properties, and Corrosion Behavior of TC4 Alloy Fabricated by Selective Laser Melting

Huiling Zhou, Ji Li, Shugang Zhang, Bin Yang, Yuanbin Gui, Xiangbo Li, Huixia Zhang, Xiaoru Zhuo, Sheng Lu, Yanxin Qiao

Metals · 03.03.2026 · 16 (3) · 284

DOI: 10.3390/met16030284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 03.03.2026. Verfasst von Huiling Zhou und 9 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 97 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Selective laser melting (SLM), a pivotal additive manufacturing (AM) technology for titanium alloys, enables near-net-shape forming of complex structures with relative densities of up to 99.9%, making it indispensable in aerospace, biomedical, and marine engineering. This review comprehensively updates the state of the art on SLM-fabricated TC4 (Ti-6Al-4V) alloy, addressing critical gaps in previous studies by integrating novel research progress, in-depth mechanistic analyses, and multi-dimensional comparisons. The core focus is on the unique thermal cycle (106–108 °C/s heating/cooling rates) of SLM, which induces a predominant needle-like martensitic α′ phase (99.7%) and minimal β phase (0.3%), leading to intrinsic anisotropy and low ductility. Room-temperature tensile strength reaches 1315.32 MPa with 9.6% elongation, and high-cycle fatigue limits the range from 417 to 829 MPa, strongly dependent on process parameters and post-treatment. Corrosion anisotropy is systematically analyzed: the XY plane (parallel to scanning direction) exhibits superior corrosion resistance in 1 M HCl (fewer pits and lower corrosion current density) and 3.5% NaCl (more stable passive film) compared to the XZ plane (deposition direction). Novel insights include: (1) synergistic effects of SLM process parameters (laser power–scanning speed–hatch spacing) on defect evolution and microstructure uniformity; (2) atomistic mechanisms of α′→α + β phase transformation during post-heat treatment; and (3) corrosion–mechanical coupling behavior in harsh environments (e.g., marine and biomedical). Post-treatment strategies are refined: annealing at 800 °C for 2 h achieves 1099 MPa tensile strength and 17.4% elongation, while hot isostatic pressing (HIP) reduces porosity from 0.08% to 0.01% and weakens fatigue anisotropy. This review also identifies unresolved challenges (e.g., in situ defect monitoring and multi-field regulated performance) and proposes future directions (e.g., AI-driven process optimization and functional gradient structures).

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhou, H., Li, J., Zhang, S., Yang, B., Gui, Y., Li, X., Zhang, H., Zhuo, X., Lu, S., & Qiao, Y. (2026). Research Progress on the Microstructure, Mechanical Properties, and Corrosion Behavior of TC4 Alloy Fabricated by Selective Laser Melting. Metals, 16(3), 284. https://doi.org/10.3390/met16030284

Vancouver

Zhou H, Li J, Zhang S, Yang B, Gui Y, Li X, et al. Research Progress on the Microstructure, Mechanical Properties, and Corrosion Behavior of TC4 Alloy Fabricated by Selective Laser Melting. Metals. 2026;16(3):284. doi:10.3390/met16030284

BibTeX
@article{Zhou2026,
  author = {Zhou, Huiling and Li, Ji and Zhang, Shugang and Yang, Bin and Gui, Yuanbin and Li, Xiangbo and Zhang, Huixia and Zhuo, Xiaoru and Lu, Sheng and Qiao, Yanxin},
  title = {Research Progress on the Microstructure, Mechanical Properties, and Corrosion Behavior of TC4 Alloy Fabricated by Selective Laser Melting},
  journal = {Metals},
  year = {2026},
  volume = {16},
  number = {3},
  pages = {284},
  doi = {10.3390/met16030284}
}
Kostenlos starten →