Making Use of Low‐Cost High‐Pressure–High‐Temperature‐Diamond Materials for Industry‐Type Quantum Sensor Device Applications
physica status solidi (a) · 2025-03 · 222 (5)
DOI: 10.1002/pssa.202400457 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 22.09.2024. Verfasst von Mario Bähr und 8 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 77 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung.
Abstract (Originalsprache)
A cost‐effective approach to provide diamond platelets containing nitrogen vacancy center ensembles (NVs) in the range of ppm is investigated. Industry‐type high‐pressure–high‐temperature‐diamond type 1b containing a high number of interstitial nitrogen in the range of several tens of ppm are used and small diamond platelets (size ≈1 × 1 mm 2 , thickness ≈300 μm) are prepared by laser cutting and polishing. The nitrogen is converted into NV by means of high‐energy electron irradiation of 10 MeV and annealing at 900 °C. Variations in the irradiation dose between 0.5E18 1/cm 2 and 2E18 1/cm 2 result in different densities of NV. The diamond platelets are analyzed with regard to their nitrogen concentration and photoluminescence as well as optically detected magnetic resonance is used to investigate the usability for a NV‐based magnetometer. A method to calculate the ratio of negatively to neutrally charged NV (NV − /NV 0 ) is proposed that uses the photoluminescence intensities of the spectrum at 575 and 638 nm, namely, the zero‐phonon lines of NV − and NV 0 .
Förderung
- Bundesministerium für Bildung und Forschung
Zitieren
APA
Bähr, M., Wild, C., Knolle, W., Javed, M. B., Fuhrmann, J., Lühmann, T., Reiss, S., Meijer, J. B., & Ortlepp, T. (2025). Making Use of Low‐Cost High‐Pressure–High‐Temperature‐Diamond Materials for Industry‐Type Quantum Sensor Device Applications. physica status solidi (a), 222(5). https://doi.org/10.1002/pssa.202400457
Vancouver
Bähr M, Wild C, Knolle W, Javed MB, Fuhrmann J, Lühmann T, et al. Making Use of Low‐Cost High‐Pressure–High‐Temperature‐Diamond Materials for Industry‐Type Quantum Sensor Device Applications. physica status solidi (a). 2025;222(5). doi:10.1002/pssa.202400457
BibTeX
@article{Bhr2025,
author = {Bähr, Mario and Wild, Christoph and Knolle, Wolfgang and Javed, Muhammad B. and Fuhrmann, Jens and Lühmann, Tobias and Reiss, Steffanie and Meijer, Jan B. and Ortlepp, Thomas},
title = {Making Use of Low‐Cost High‐Pressure–High‐Temperature‐Diamond Materials for Industry‐Type Quantum Sensor Device Applications},
journal = {physica status solidi (a)},
year = {2025},
volume = {222},
number = {5},
doi = {10.1002/pssa.202400457}
}
EUVIMED