Fiber‐Integrated Diamond Quantum Sensor for High‐Voltage Current Measurements
Advanced Sensor Research · 2025-01 · 4 (1)
DOI: 10.1002/adsr.202400106 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Sensor Research, online erschienen am 07.10.2024. Verfasst von Qihui Liu und 13 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Technologies Research and Development Program.
Abstract (Originalsprache)
In power network systems, there is an urgent demand for highly accurate and miniaturized sensors, owing to their high safety level and limited installation space. Current sensors in high‐voltage grids are required to accommodate harsh environments and provide accurate measurements of several kiloamperes. Thus, this study proposed an integrated quantum diamond sensor to facilitate high‐accuracy, large‐dynamic‐range current measurements. The design incorporated optical fiber and directional microwave (MW) antennas to drive the diamond sensor, which significantly reduced the size and power consumption on the high‐voltage side. Remote‐control and demodulation systems are installed more than 10 m away from the low‐voltage side. The proposed approach achieved zero power consumption on the high‐voltage side and ensured efficient signal transmission. A passive diamond probe manufactured using microfabrication processes facilitated miniaturization and practical deployment. Through parameter optimization, a magnetic detection sensitivity of 4.86 nT·Hz −1/2 is achieved at a safe distance of 11 m, which can be further optimized to 0.77 nT·Hz −1/2 with enhanced MW power. This sensor achieved a current measurement error of ±0.4% in the 1000 A measurement range. Thus, this study provides a new solution for the application of diamond quantum sensors in power systems.
Förderung
- Key Technologies Research and Development Program
Zitieren
APA
Liu, Q., Nie, S., Peng, X., Zhu, Y., Wang, N., Hu, Y., Luo, X., li, C., Jing, M., Zhang, C., Liu, W., Chen, H., Cheng, J., & Wu, Z. (2025). Fiber‐Integrated Diamond Quantum Sensor for High‐Voltage Current Measurements. Advanced Sensor Research, 4(1). https://doi.org/10.1002/adsr.202400106
Vancouver
Liu Q, Nie S, Peng X, Zhu Y, Wang N, Hu Y, et al. Fiber‐Integrated Diamond Quantum Sensor for High‐Voltage Current Measurements. Advanced Sensor Research. 2025;4(1). doi:10.1002/adsr.202400106
BibTeX
@article{Liu2025,
author = {Liu, Qihui and Nie, Shaoxiong and Peng, Xiao and Zhu, Yaochen and Wang, Nan and Hu, Yuqiang and Luo, Xin and li, Chun and Jing, Maoheng and Zhang, Chunji and Liu, Wei and Chen, Hao and Cheng, Jiangong and Wu, Zhenyu},
title = {Fiber‐Integrated Diamond Quantum Sensor for High‐Voltage Current Measurements},
journal = {Advanced Sensor Research},
year = {2025},
volume = {4},
number = {1},
doi = {10.1002/adsr.202400106}
}
EUVIMED