Chemical and Topographical Changes upon Sub‐100‐nm Laser‐Induced Periodic Surface Structure Formation on Titanium Alloy: The Influence of Laser Pulse Repetition Rate and Number of Over‐Scans
physica status solidi (a) · 2024-08 · 221 (15)
DOI: 10.1002/pssa.202300719 ↗Kurz gefasst
Fachartikel in der Zeitschrift physica status solidi (a), online erschienen am 03.12.2023. Verfasst von Kai Müller und 12 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020 Framework Programme.
Abstract (Originalsprache)
Titanium and its alloys are known to allow the straightforward laser‐based manufacturing of ordered surface nanostructures, so‐called high spatial frequency laser‐induced periodic surface structures (HSFL). These structures exhibit sub‐100 nm spatial periods – far below the optical diffraction limit. The resulting surface functionalities are usually enabled by both, topographic and chemical alterations of the nanostructured surfaces. For exploring these effects, multi‐method characterizations were performed here for HSFL processed on Ti–6Al–4V alloy upon irradiation with near‐infrared ps‐laser pulses (1030 nm, ≈1 ps pulse duration, 1–400 kHz) under different laser scan processing conditions, i.e., by systematically varying the pulse repetition frequency and the number of laser irradiation passes. The sample characterization involved morphological and topographical investigations by scanning electron microscopy (SEM), atomic force microscopy (AFM), tactile stylus profilometry, as well as near‐surface chemical analyses hard X‐ray photoelectron spectroscopy (HAXPES) and depth‐profiling time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). This provides a quantification of the laser ablation depth, the geometrical HSFL characteristics and enables new insights into the depth extent and the nature of the non‐ablative laser‐induced near‐surface oxidation accompanying these nanostructures. This allows to answer the questions how the processing of HSFL can be industrially scaled up, and whether the latter is limited by heat‐accumulation effects.
Förderung
- Horizon 2020 Framework Programme
Zitieren
APA
Müller, K., Mirabella, F., Knigge, X., Mezera, M., Weise, M., Sahre, M., Wasmuth, K., Voss, H., Hertwig, A., Krüger, J., Radnik, J., Hodoroaba, V., & Bonse, J. (2024). Chemical and Topographical Changes upon Sub‐100‐nm Laser‐Induced Periodic Surface Structure Formation on Titanium Alloy: The Influence of Laser Pulse Repetition Rate and Number of Over‐Scans. physica status solidi (a), 221(15). https://doi.org/10.1002/pssa.202300719
Vancouver
Müller K, Mirabella F, Knigge X, Mezera M, Weise M, Sahre M, et al. Chemical and Topographical Changes upon Sub‐100‐nm Laser‐Induced Periodic Surface Structure Formation on Titanium Alloy: The Influence of Laser Pulse Repetition Rate and Number of Over‐Scans. physica status solidi (a). 2024;221(15). doi:10.1002/pssa.202300719
BibTeX
@article{Mller2024,
author = {Müller, Kai and Mirabella, Francesca and Knigge, Xenia and Mezera, Marek and Weise, Matthias and Sahre, Mario and Wasmuth, Karsten and Voss, Heike and Hertwig, Andreas and Krüger, Jörg and Radnik, Jörg and Hodoroaba, Vasile-Dan and Bonse, Jörn},
title = {Chemical and Topographical Changes upon Sub‐100‐nm Laser‐Induced Periodic Surface Structure Formation on Titanium Alloy: The Influence of Laser Pulse Repetition Rate and Number of Over‐Scans},
journal = {physica status solidi (a)},
year = {2024},
volume = {221},
number = {15},
doi = {10.1002/pssa.202300719}
}
EUVIMED