EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of Flexural Strength of PLA Flexural Test Specimens Produced by FDM Using Taguchi L27 Orthogonal Array and Hybrid Regression Model

Mehmet Şah Gültekin, Cüneyt Özdemir

Journal of Polymer Science · 15.05.2026 · 64 (10) · 2122-2137

DOI: 10.1002/pola.70116 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Polymer Science, online erschienen am 30.03.2026. Verfasst von Mehmet Şah Gültekin und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused Deposition Modeling (FDM) enables manufacturing of complex geometries, but flexural strength of printed parts is highly sensitive to process parameters. This study investigated five key factors—printing speed (PS: 100–150 mm/s), infill density (ID: 50–100%), layer height (LH: 0.20–0.30 mm), wall thickness (WT: 0.8–1.6 mm), and nozzle temperature (NT: 175°C–225°C)—to optimize the flexural strength of PLA specimens. A Taguchi L27 orthogonal array was employed to capture nonlinear effects and parameter interactions more comprehensively than standard designs. Experimental results were analyzed using analysis of variance (ANOVA) and signal‐to‐noise (S/N) ratios. The study found WT and LH to be the most influential parameters, while PS and ID had smaller impacts on flexural strength. Additionally, a regression model was developed to describe the relationship between process parameters and mechanical performance, achieving R 2 = 98.22%, adjusted R 2 = 97.11%, and predicted R 2 = 94.94%. Residual analyses confirmed the model's reliability and absence of overfitting. The optimal parameter combinations identified offer practical guidelines for enhancing flexural strength and reducing variability in FDM‐produced PLA components, supporting efficient and predictable part fabrication.

Zitieren

APA

Gültekin, M. Ş., & Özdemir, C. (2026). Optimization of Flexural Strength of PLA Flexural Test Specimens Produced by FDM Using Taguchi L27 Orthogonal Array and Hybrid Regression Model. Journal of Polymer Science, 64(10), 2122-2137. https://doi.org/10.1002/pola.70116

Vancouver

Gültekin MŞ, Özdemir C. Optimization of Flexural Strength of PLA Flexural Test Specimens Produced by FDM Using Taguchi L27 Orthogonal Array and Hybrid Regression Model. Journal of Polymer Science. 2026;64(10):2122-2137. doi:10.1002/pola.70116

BibTeX
@article{Gltekin2026,
  author = {Gültekin, Mehmet Şah and Özdemir, Cüneyt},
  title = {Optimization of Flexural Strength of PLA Flexural Test Specimens Produced by FDM Using Taguchi L27 Orthogonal Array and Hybrid Regression Model},
  journal = {Journal of Polymer Science},
  year = {2026},
  volume = {64},
  number = {10},
  pages = {2122--2137},
  doi = {10.1002/pola.70116}
}
Kostenlos starten →