EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stability of Barrier Layer Stacks Against Aluminum for Solar Cells With Poly‐Si/SiO x Passivating Contacts

Heiko Plagwitz, Benjamin Gapp, David Bäurle, Emanuel Auerbacher, Barbara Terheiden

Progress in Photovoltaics: Research and Applications · 16.11.2026

DOI: 10.1002/pip.70152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 16.11.2026. Verfasst von Heiko Plagwitz und 4 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We show that SiC x ‐ and TiO x /TiN x ‐based layer stacks can be used as a high‐quality barrier coating for the metallization of the polycrystalline silicon/tunnel oxide passivated rear side of silicon solar cells by screen printed and sintered aluminum pastes, while maintaining the high passivation quality. The layer stacks are produced by physical vapor deposition (PVD) in case of TiN x and TiO x , and plasma enhanced chemical vapor deposited (PECVD) in case of SiC x . Structural properties are determined by X‐ray diffractive (XRD) measurements. Their barrier functionality, i.e., the impact of full‐area Al printing and firing onto the barrier‐protected passivating contacts, is assessed by measurements of the i V oc of dedicated samples before and after metallization, determined by photoconductance decay measurements. Finally, the long‐term stability of the barriers against diffusion of Al is assessed by i V oc measurements of metallized samples during accelerated aging tests at elevated temperatures. Both the stability against Al paste during the contact firing process and long‐term stability against Al diffusion at elevated temperatures of 85°C for ~1000 h are demonstrated. Especially the combined SiC x /TiO x /TiN x coatings enable only negligible i V oc losses during both processes. Very low contact resistivities through TiO x /TiN x barriers have already been shown elsewhere by the authors.

Zitieren

APA

Plagwitz, H., Gapp, B., Bäurle, D., Auerbacher, E., & Terheiden, B. (2026). Stability of Barrier Layer Stacks Against Aluminum for Solar Cells With Poly‐Si/SiO x Passivating Contacts. Progress in Photovoltaics: Research and Applications. https://doi.org/10.1002/pip.70152

Vancouver

Plagwitz H, Gapp B, Bäurle D, Auerbacher E, Terheiden B. Stability of Barrier Layer Stacks Against Aluminum for Solar Cells With Poly‐Si/SiO x Passivating Contacts. Progress in Photovoltaics: Research and Applications. 2026. doi:10.1002/pip.70152

BibTeX
@article{Plagwitz2026,
  author = {Plagwitz, Heiko and Gapp, Benjamin and Bäurle, David and Auerbacher, Emanuel and Terheiden, Barbara},
  title = {Stability of Barrier Layer Stacks Against Aluminum for Solar Cells With Poly‐Si/SiO x Passivating Contacts},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2026},
  doi = {10.1002/pip.70152}
}
Kostenlos starten →