EUVIMEDEUVIMED entdecken
Crossref

Screen‐Printed Silver‐Nickel Hybrid Contacts for SiO x /n + ‐Poly‐Si Layers in TOPCon Solar Cells

Qinqin Wang, Yonggang Cao, Kaiyuan Guo, Siwen Gu, Wangping Wu, Lvzhou Li, Jianning Ding

Progress in Photovoltaics: Research and Applications · 2026-12 · 34 (12) · 1564-1577

DOI: 10.1002/pip.70146 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 15.09.2026. Verfasst von Qinqin Wang und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tunneling Oxide Passivated Contact (TOPCon) solar cells have emerged as a dominant technology in the global photovoltaic market due to their superior efficiency and long‐term stability. However, the metallization process continues to rely predominantly on costly silver (Ag) pastes, making cost reduction a prerequisite for their continued large‐scale deployment. In this study, nickel (Ni) particles were strategically incorporated into conventional Ag pastes to reduce noble metal consumption without compromising device performance. To address the inherent challenges of Ni—namely its lower bulk conductivity and work function mismatch with the silicon emitter—the Ni/Ag weight ratio was systematically optimized. SEM and EDS analyses confirmed a highly uniform distribution of Ag and Ni within the printed features. Notably, the Ag‐Ni hybrid paste exhibited enhanced rheological properties, yielding grid lines with a higher aspect ratio compared to benchmark pure‐Ag pastes. High‐resolution TEM images of the contact interface revealed a unique morphology where Ni particles were encapsulated by Ag colloids, preventing direct Ni‐Si contact, whereas interfacial gaps were effectively filled by glass frit. At an optimized Ni content of 10 wt%, the solar cells demonstrated optimal performance, achieving an average contact resistivity of 2.79 mΩ.cm 2 . In a mass‐production environment, the fill factor ( FF ) and efficiency ( E ff ) exhibited only minimal reductions of 0.36% and 0.1%, respectively, compared to the reference cell. The optimized cells maintained a high conversion efficiency of over 26.5%, with an open‐circuit voltage of 0.744 V, a short‐circuit current density of 41.47 mA/cm 2 , and a FF of 87.10%. Furthermore, the robust reliability in internal cell‐level testing exhibited less than 5% performance degradation after a 48‐h damp heat test under the conditions of 45°C/95% RH. These results demonstrate a viable pathway toward cost‐effective metallization for next‐generation TOPCon solar cells.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China

Zitieren

APA

Wang, Q., Cao, Y., Guo, K., Gu, S., Wu, W., Li, L., & Ding, J. (2026). Screen‐Printed Silver‐Nickel Hybrid Contacts for SiO x /n + ‐Poly‐Si Layers in TOPCon Solar Cells. Progress in Photovoltaics: Research and Applications, 34(12), 1564-1577. https://doi.org/10.1002/pip.70146

Vancouver

Wang Q, Cao Y, Guo K, Gu S, Wu W, Li L, et al. Screen‐Printed Silver‐Nickel Hybrid Contacts for SiO x /n + ‐Poly‐Si Layers in TOPCon Solar Cells. Progress in Photovoltaics: Research and Applications. 2026;34(12):1564-1577. doi:10.1002/pip.70146

BibTeX
@article{Wang2026,
  author = {Wang, Qinqin and Cao, Yonggang and Guo, Kaiyuan and Gu, Siwen and Wu, Wangping and Li, Lvzhou and Ding, Jianning},
  title = {Screen‐Printed Silver‐Nickel Hybrid Contacts for SiO x /n + ‐Poly‐Si Layers in TOPCon Solar Cells},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2026},
  volume = {34},
  number = {12},
  pages = {1564--1577},
  doi = {10.1002/pip.70146}
}
Kostenlos starten →