EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing

Yuan‐Chih Chang, Yuchao Zhang, Li Wang, Sisi Wang, Haoran Wang, Chien‐Yu Huang, Ran Chen, Catherine Chan, Brett Hallam

Progress in Photovoltaics: Research and Applications · 2025-01 · 33 (1) · 158-169

DOI: 10.1002/pip.3799 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 22.03.2024. Verfasst von Yuan‐Chih Chang und 8 weiteren Autor:innen. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Australian Renewable Energy Agency, Australian Centre for Advanced Photovoltaics.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As PV manufacturing heads towards the multi‐TW scale, it is required to carefully evaluate a wide range of concepts including not only efficiency and cost but also material consumption to ensure sustainable manufacturing of PV technologies. The rapid growth of PV could significantly increase the demand for several materials required in solar cells such as silver, aluminium, copper and even silicon, thereby causing dramatic price fluctuations. Furthermore, the PV manufacturing capacity would be at risk of being limited by the supply of some scarce metals, e.g. with current industrial implementations – screen printing (SP) metallization, the capacities of PERC and TOPCon could be capped at 377 GW and 227 GW with 20% of global silver supply available to the PV industry. In addition, PV systems have ~25–30 years lifespan to ensure low LCOE and emissions. Recycling alone will not provide an immediate solution to overcome the limitation of material consumption in the exponentially growing PV market. It is expected that the Ag usage needs to be reduced to no more than 5 mg/W or even 2 mg/W for all solar cell technologies to allow a multi‐TW manufacturing scale without depleting the global silver supply. Therefore, further advancements in metallization technologies are critically and urgently required to significantly reduce the silver consumption of current screen‐printed contacts in industrial silicon solar cells. This paper firstly presents a roadmap towards the 5 mg/W and 2 mg/W silver consumption targets with various metallization technologies and screen‐printing designs. Subsequently, a hybrid plating on screen‐printed metallization design was proposed to improve the performance and reduce the silver consumption of screen‐printed contacts. The experimental results have demonstrated up to 1.08% abs improvements in fill factor and 0.3% abs gains in cell efficiency. In addition, up to 40% rel reductions in finger silver consumption have been achieved without any sacrifices in the electrical conductivity of such hybrid screen‐printed and plated fingers. This work proposes not only a roadmap but also a promising approach to significantly reduce the Ag demand and benefit sustainable production of industrial screen‐printed silicon solar cells in the TW era.

Förderung

  • Australian Renewable Energy Agency
  • Australian Centre for Advanced Photovoltaics

Zitieren

APA

Chang, Y., Zhang, Y., Wang, L., Wang, S., Wang, H., Huang, C., Chen, R., Chan, C., & Hallam, B. (2025). Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing. Progress in Photovoltaics: Research and Applications, 33(1), 158-169. https://doi.org/10.1002/pip.3799

Vancouver

Chang Y, Zhang Y, Wang L, Wang S, Wang H, Huang C, et al. Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing. Progress in Photovoltaics: Research and Applications. 2025;33(1):158-169. doi:10.1002/pip.3799

BibTeX
@article{Chang2025,
  author = {Chang, Yuan‐Chih and Zhang, Yuchao and Wang, Li and Wang, Sisi and Wang, Haoran and Huang, Chien‐Yu and Chen, Ran and Chan, Catherine and Hallam, Brett},
  title = {Silver‐lean metallization and hybrid contacts via plating on screen‐printed metal for silicon solar cells manufacturing},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2025},
  volume = {33},
  number = {1},
  pages = {158--169},
  doi = {10.1002/pip.3799}
}
Kostenlos starten →