EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultra‐Thin Bipoly Solar Cells With Front Selective n‐Type TOPCon and Rear Blanket p‐Type TOPCon Layers

Yuchi Lan, John Derek Arcebal, Gabby De Luna, Pradeep Padhamnath, Armin Gerhard Aberle, Aaron Danner

Progress in Photovoltaics: Research and Applications · 2026-09 · 34 (9) · 1113-1124

DOI: 10.1002/pip.70114 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Photovoltaics: Research and Applications, online erschienen am 12.05.2026. Verfasst von Yuchi Lan und 5 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation Singapore, Energy Market Authority of Singapore.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates ultra‐thin silicon solar cells with polysilicon (poly‐Si) passivated contacts on both sides (biPoly cells). Low‐pressure chemical vapor deposition (LPCVD) was used for the deposition of front and rear poly‐Si layers along with a complete passivation structure. Patterning of the top poly‐Si layer was used to restrict it to the metal‐finger regions, thereby improving carrier lifetime and useful light absorption. A saw damage etching (SDE) process with varied time was used for thinning down the silicon (Si) substrates. The thinnest bendable cell achieved is 80 m thick, with an efficiency of 19.7%. Because cell mass per area approximately scales with silicon thickness, the efficiency‐to‐thickness ratio is a practical proxy for specific power in lightweight/flexible use‐cases. Our devices reach 0.25% per m, to our knowledge among the highest reported for TOPCon cells at comparable thickness. The results highlight the potential of selective biPoly passivated ultra‐thin silicon solar cells for high‐performance photovoltaic applications.

Förderung

  • National Research Foundation Singapore
  • Energy Market Authority of Singapore

Zitieren

APA

Lan, Y., Arcebal, J. D., Luna, G. D., Padhamnath, P., Aberle, A. G., & Danner, A. (2026). Ultra‐Thin Bipoly Solar Cells With Front Selective n‐Type TOPCon and Rear Blanket p‐Type TOPCon Layers. Progress in Photovoltaics: Research and Applications, 34(9), 1113-1124. https://doi.org/10.1002/pip.70114

Vancouver

Lan Y, Arcebal JD, Luna GD, Padhamnath P, Aberle AG, Danner A. Ultra‐Thin Bipoly Solar Cells With Front Selective n‐Type TOPCon and Rear Blanket p‐Type TOPCon Layers. Progress in Photovoltaics: Research and Applications. 2026;34(9):1113-1124. doi:10.1002/pip.70114

BibTeX
@article{Lan2026,
  author = {Lan, Yuchi and Arcebal, John Derek and Luna, Gabby De and Padhamnath, Pradeep and Aberle, Armin Gerhard and Danner, Aaron},
  title = {Ultra‐Thin Bipoly Solar Cells With Front Selective n‐Type TOPCon and Rear Blanket p‐Type TOPCon Layers},
  journal = {Progress in Photovoltaics: Research and Applications},
  year = {2026},
  volume = {34},
  number = {9},
  pages = {1113--1124},
  doi = {10.1002/pip.70114}
}
Kostenlos starten →