An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing
Polymer International · 2024-07 · 73 (7) · 516-529
DOI: 10.1002/pi.6624 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer International, online erschienen am 11.03.2024. Verfasst von Xiancheng Lv und 5 weiteren Autor:innen. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 46 Literaturangaben.
Abstract (Originalsprache)
Carbon fiber reinforced polyether ether ketone (CF/PEEK) composites are widely used as tribo‐materials in the aerospace and automotive industry. To amplify the industrial utilization of extrusion‐based additive manufacturing fused deposition modeling in fabricating CF/PEEK tribo‐composites, the composites' microstructure–property relationship was studied with respect to carbon fiber content varying between 5 wt% and 30 wt%. This revealed that the incorporation of carbon fibers helped enhance the mechanical strength of PEEK greatly with an optimal content of 5 wt%, at which the composite material exhibited the highest crystallinity as well as the best mechanical performance. Tribological tests indicated that CF/PEEK composites were more suitable for high speed and heavy load conditions especially for 20 wt% CF/PEEK, which was associated with the establishment of high quality transfer films covered on counter steel surfaces. The present work provides a simple and low cost way of fabricating high performance PEEK composites used as tribo‐materials. © 2024 Society of Industrial Chemistry.
Zitieren
APA
Lv, X., Yang, S., Pei, X., Zhang, Y., Wang, Q., & Wang, T. (2024). An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing. Polymer International, 73(7), 516-529. https://doi.org/10.1002/pi.6624
Vancouver
Lv X, Yang S, Pei X, Zhang Y, Wang Q, Wang T. An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing. Polymer International. 2024;73(7):516-529. doi:10.1002/pi.6624
BibTeX
@article{Lv2024,
author = {Lv, Xiancheng and Yang, Shuyan and Pei, Xianqiang and Zhang, Yaoming and Wang, Qihua and Wang, Tingmei},
title = {An investigation of the microstructure and tribological behavior of polyether ether ketone composites fabricated by extrusion‐based additive manufacturing},
journal = {Polymer International},
year = {2024},
volume = {73},
number = {7},
pages = {516--529},
doi = {10.1002/pi.6624}
}
EUVIMED