Preparation and Properties of Silane‐Modified Polyvinyl Alcohol Fiber Reinforced High‐Wear‐Resistant Rubber Solid Tire Tread Compound
Polymer Engineering & Science · 2026-11 · 66 (11) · 8225-8243
DOI: 10.1002/pen.70824 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 27.08.2026. Verfasst von Xi Wang und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Key Technology Research and Development Program of Shandong Province, Natural Science Foundation of Shandong Province.
Abstract (Originalsprache)
Rubber‐based solid tire tread compounds suffer from insufficient abrasion resistance, limiting their service life under severe conditions. Here, high‐strength polyvinyl alcohol fiber (PVAF) was surface‐modified with silane coupling agent Si69 to improve its compatibility with a non‐polar NR/SBR matrix. Single‐factor experiments optimized treatment temperature, Si69 concentration, PVAF length, and loading; the optimal levels (70°C, 4 wt% Si69, 3 mm, 2 phr) were then simultaneously applied in a confirmatory experiment to validate performance. Compared with the unfilled compound, the optimized formulation increased crosslink density by 11.2% and extended scorch time by 13.8%, while DIN and Akron abrasion losses decreased by 39.32% and 14.03%, respectively. Wet skid resistance (tan δ at 0°C) remained essentially unchanged, and a modest reduction in rolling resistance (tan δ at 60°C) was observed. These improvements are conditional on the simultaneous use of the four optimized parameters and should not be generalized to all PVAF‐containing formulations. Overall, Si69‐modified PVAF with the optimal parameters proves an effective, cost‐efficient reinforcing filler, offering a new technical pathway for high‐wear‐resistance rubber solid tires.
Förderung
- National Natural Science Foundation of China
- Key Technology Research and Development Program of Shandong Province
- Natural Science Foundation of Shandong Province
- National Key Research and Development Program of China
Zitieren
APA
Wang, X., Liu, K., Yuan, Q., Wang, C., & Zhang, D. (2026). Preparation and Properties of Silane‐Modified Polyvinyl Alcohol Fiber Reinforced High‐Wear‐Resistant Rubber Solid Tire Tread Compound. Polymer Engineering & Science, 66(11), 8225-8243. https://doi.org/10.1002/pen.70824
Vancouver
Wang X, Liu K, Yuan Q, Wang C, Zhang D. Preparation and Properties of Silane‐Modified Polyvinyl Alcohol Fiber Reinforced High‐Wear‐Resistant Rubber Solid Tire Tread Compound. Polymer Engineering & Science. 2026;66(11):8225-8243. doi:10.1002/pen.70824
BibTeX
@article{Wang2026,
author = {Wang, Xi and Liu, Kexin and Yuan, Qi and Wang, Chuansheng and Zhang, Dewei},
title = {Preparation and Properties of Silane‐Modified Polyvinyl Alcohol Fiber Reinforced High‐Wear‐Resistant Rubber Solid Tire Tread Compound},
journal = {Polymer Engineering & Science},
year = {2026},
volume = {66},
number = {11},
pages = {8225--8243},
doi = {10.1002/pen.70824}
}
EUVIMED