EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Control of Tire Wear Particulate Matter through Tire Tread Prescription

Jin U Ha iD, Seok H Bae, Yu J Choi, Pyoung-Chan Lee, Sun K Jeoung, Sanghoon Song iD, Choong Choi, Jae S Lee, Jaeyun Kim, In S Han

Polymers · 23.06.2023 · 15 (13) · 2795

DOI: 10.3390/polym15132795 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.06.2023. Verfasst von Jin U Ha und 9 weiteren Autor:innen. Beteiligte Einrichtung: Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry, and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to analyze tire wear particulate matter (TWP) from tread rubber with different formulations and to compare the concentration of TWP with different wear devices. The TWP generated during the abrasion of truck and bus radial (TBR) tires were examined, and the effect of using different types of rubber and carbon black (CB) were investigated. When natural rubber (NR) was solely used as the tire tread rubber material, there was a higher concentration of 5–10 µm TWP. However, when the tread formulation consisted of NR mixed with butadiene rubber, the TWP concentration decreased. Changing the type of CB also reduced the amount of TWP in the 2.5 µm size range. The TWP concentration in the specimens increased with increasing speed and vertical load. The TWP generated during the abrasion tests using wear testers and tire simulators exhibited similar trends. These findings suggest that modifying tire tread formulations can effectively control the distribution and amount of TWP generation.

Schlagwörter

Stichwörter der Autor:innen

abrasionparticulate mattertiretruck bus radialwearwear simulator

Autor:innen und Institutionen

  • Chassis & Materials Research Laboratory, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea.
  • School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea.
  • R&D Department, Hankook Tire & Technology, Daejeon 34127, Republic of Korea.
  • R&D Department, OCI, Sungnam-si 13212, Republic of Korea.
  • R&D Department, Kumho Petrochemical, Daejeon 34044, Republic of Korea.
  • Interior & Exterior Materials Development Team, Hwaseong-si 18280, Republic of Korea.

ORCID-Profile: Jin U Ha, Sanghoon Song

Förderung

  • Ministry of Trade, Industry, and Energy

Zitieren

APA

Ha, J. U., Bae, S. H., Choi, Y. J., Lee, P. C., Jeoung, S. K., Song, S., Choi, C., Lee, J. S., Kim, J., & Han, I. S. (2023). Control of Tire Wear Particulate Matter through Tire Tread Prescription. Polymers, 15(13), 2795. https://doi.org/10.3390/polym15132795

Vancouver

Ha JU, Bae SH, Choi YJ, Lee PC, Jeoung SK, Song S, et al. Control of Tire Wear Particulate Matter through Tire Tread Prescription. Polymers. 2023;15(13):2795. doi:10.3390/polym15132795

BibTeX
@article{Ha2023,
  author = {Ha, Jin U and Bae, Seok H and Choi, Yu J and Lee, Pyoung-Chan and Jeoung, Sun K and Song, Sanghoon and Choi, Choong and Lee, Jae S and Kim, Jaeyun and Han, In S},
  title = {Control of Tire Wear Particulate Matter through Tire Tread Prescription},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {13},
  pages = {2795},
  doi = {10.3390/polym15132795}
}
Kostenlos starten →