EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Reaction Conditions and Water on the Manufacture of C9 Aromatic Hydrocarbon Resins

Jéssica Bentes, Lys H. R. Mangia, Caio Henrique Pinheiro, José Capistrano Nobre de Abreu, Camila Guindani, José Carlos Pinto

Polymer Engineering & Science · 2026-11 · 66 (11) · 8191-8204

DOI: 10.1002/pen.70822 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 16.08.2026. Verfasst von Jéssica Bentes und 5 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aromatic hydrocarbons (HRs) find many commercial applications, demanding control of the cationic reaction conditions to achieve specific resin properties. For this reason, in the present work a systematic and original investigation of C9 HR production through AlCl 3 cationic polymerization is presented, with particular emphasis on the role of water, which was treated not as a passive impurity but as a quantified and optimized co‐catalyst. The effects of temperature, solvent, catalyst loading, and catalyst: co‐catalyst ratio were evaluated and correlated with reaction performance and resin properties. The results showed that all reactions provided minimum conversions of 50% and exhibited exothermic peaks up to 20°C, indicating successful polymerization and leading to products with average molar masses exceeding 1.3 kDa. In particular, water was found to significantly influence reaction exothermicity and polymer yield, confirming its role in the formation of active species, while average molar masses and softening points (Ts) were less sensitive to reaction conditions (between 50°C and 70°C). The experimental design was extended to different solvents and increased solvent contents, particularly toluene, enabling extrapolation beyond the initial design space. These results provide a systematic framework for the optimization of HRs synthesis and establish water as a critical design variable in the investigated systems. Multifactorial analysis revealed key correlations among process variables, including a consistent inverse relationship between resin yield and softening point (Ts), highlighting an intrinsic trade‐off in process optimization that has been overlooked in previous studies performed with model and pure monomer feeds.

Zitieren

APA

Bentes, J., Mangia, L. H. R., Pinheiro, C. H., Abreu, J. C. N. D., Guindani, C., & Pinto, J. C. (2026). Influence of Reaction Conditions and Water on the Manufacture of C9 Aromatic Hydrocarbon Resins. Polymer Engineering & Science, 66(11), 8191-8204. https://doi.org/10.1002/pen.70822

Vancouver

Bentes J, Mangia LHR, Pinheiro CH, Abreu JCND, Guindani C, Pinto JC. Influence of Reaction Conditions and Water on the Manufacture of C9 Aromatic Hydrocarbon Resins. Polymer Engineering & Science. 2026;66(11):8191-8204. doi:10.1002/pen.70822

BibTeX
@article{Bentes2026,
  author = {Bentes, Jéssica and Mangia, Lys H. R. and Pinheiro, Caio Henrique and Abreu, José Capistrano Nobre de and Guindani, Camila and Pinto, José Carlos},
  title = {Influence of Reaction Conditions and Water on the Manufacture of C9 Aromatic Hydrocarbon Resins},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {11},
  pages = {8191--8204},
  doi = {10.1002/pen.70822}
}
Kostenlos starten →