EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Reaction Conditions on the Yield of Supercritical Multicomponent Thermal Fluids

Wei Zhang, Zhilin Qi, Jie Tian, Fang Xu, Deyu Kong, Mingda Dong, Shenyao Yang, Wende Yan

Energies · 09.10.2024 · 17 (19) · 5012

DOI: 10.3390/en17195012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 09.10.2024. Verfasst von Wei Zhang und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Chongqing Municipality, China, Science and Technology Research Program of Chongqing Municipal Education Commission.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Supercritical multicomponent thermal fluid (scMCTF) is a novel medium with great potential for heavy oil thermal recovery. The production rate of scMCTF will affect the injection efficiency of thermal fluid, and then affect the development effect of thermal recovery. However, at present, there are few reports on the production rate of each component of scMCTF, and their understanding is not clear. According to the existing production rate data of supercritical water (scH2O) gasification products, based on the generation mechanism of scMCTF, the production rate of thermal fluid generation products under different generation conditions was calculated, and its influencing factors were identified. The results show the following: (1) The factors affecting the production rate of scMCTF generation products can be divided into three categories: reaction raw material factors, reaction condition factors, and catalytic factors. (2) The hydrocarbon number of raw material, reaction temperature, reaction time, and catalyst concentration were positively correlated with the production rate of the product. (3) The concentration of the reaction raw material is negatively correlated with the production rate of the product. The higher the concentration of the raw material is, the lower the concentration of H2O is, and the steam reforming reaction is inhibited, which leads to the decrease in the production rate. (4) The effect of reaction pressure and catalyst load on the product is not significant. (5) The reaction product production rate increased first and then decreased with the ratio of H2O to oil in the raw material emulsion and the ratio of preheated H2O to raw material discharge. (6) The effect of metal salt catalysts is relatively stable, and the catalytic effect of simple metal catalysts is significantly different under the action of different types of accelerators, so it is necessary to study the degree of synergization of different accelerators on the catalytic effect. The results can lay a foundation for the subsequent experimental and theoretical research design.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Chongqing Municipality, China
  • Science and Technology Research Program of Chongqing Municipal Education Commission
  • Natural Science Foundation of Chongqing, China
  • the Science and Technology Research Program of Chongqing Municipal Education Commission
  • Talent Plan project of Chongqing Municipal

Zitieren

APA

Zhang, W., Qi, Z., Tian, J., Xu, F., Kong, D., Dong, M., Yang, S., & Yan, W. (2024). Influence of Reaction Conditions on the Yield of Supercritical Multicomponent Thermal Fluids. Energies, 17(19), 5012. https://doi.org/10.3390/en17195012

Vancouver

Zhang W, Qi Z, Tian J, Xu F, Kong D, Dong M, et al. Influence of Reaction Conditions on the Yield of Supercritical Multicomponent Thermal Fluids. Energies. 2024;17(19):5012. doi:10.3390/en17195012

BibTeX
@article{Zhang2024,
  author = {Zhang, Wei and Qi, Zhilin and Tian, Jie and Xu, Fang and Kong, Deyu and Dong, Mingda and Yang, Shenyao and Yan, Wende},
  title = {Influence of Reaction Conditions on the Yield of Supercritical Multicomponent Thermal Fluids},
  journal = {Energies},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {5012},
  doi = {10.3390/en17195012}
}
Kostenlos starten →