EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Design and Statistical Optimization of PLA Organoclay‐Based Dispersions for Recyclable Packaging Paper

Abdenour Chenni, Mostafa Eesaee, Bruno Chabot, Simon Barnabé, Julien Bley, Balazs Tolnai, Guy Njamen, Phuong Nguyen‐Tri

Polymer Engineering & Science · 2026-06 · 66 (6) · 4321-4333

DOI: 10.1002/pen.70499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 28.03.2026. Verfasst von Abdenour Chenni und 7 weiteren Autor:innen. Die Arbeit nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Performance and recyclability of paper coatings depend on precise control of polymer, surfactant, filler compositions as well as oil to water ratios to produce stable dispersions and defect‐free films. These factors determine fiber polymer interactions and coating removability during repulping, which are critical for efficient fiber recovery and recyclable packaging. This study examines PLA organoclay aqueous dispersions stabilized by sodium dodecyl sulfate (SDS), emphasizing particle size, zeta potential, and solids content. Using a full factorial design (2 4 ) and stepwise regression, predictive equations have been established to identify the dominant formulation factors and illustrate their combined effects through response surface modeling. The most promising formulation within the tested range (PLA 10.65 wt%, SDS 0.10 wt%, organoclay 3 wt%, oil‐to‐water ratio 1.4) was selected from the JMP Profiler using a multi‐criteria optimization, simultaneously maximizing solids content while maintaining submicronic particle size. This formulation yielded ~13% solids, kinetically stable dispersions, and defect‐free coatings. Under laboratory‐scale settings, repulpability tests revealed effective disintegration (94.7% ± 1.5% fiber recovery) without foaming. Overall, this study proposes a formulation‐driven optimization technique for producing recyclable, bio‐based PLA‐organoclay coatings for recyclable paper packaging, guided by a design of experiments strategy.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Chenni, A., Eesaee, M., Chabot, B., Barnabé, S., Bley, J., Tolnai, B., Njamen, G., & Nguyen‐Tri, P. (2026). Design and Statistical Optimization of PLA Organoclay‐Based Dispersions for Recyclable Packaging Paper. Polymer Engineering & Science, 66(6), 4321-4333. https://doi.org/10.1002/pen.70499

Vancouver

Chenni A, Eesaee M, Chabot B, Barnabé S, Bley J, Tolnai B, et al. Design and Statistical Optimization of PLA Organoclay‐Based Dispersions for Recyclable Packaging Paper. Polymer Engineering & Science. 2026;66(6):4321-4333. doi:10.1002/pen.70499

BibTeX
@article{Chenni2026,
  author = {Chenni, Abdenour and Eesaee, Mostafa and Chabot, Bruno and Barnabé, Simon and Bley, Julien and Tolnai, Balazs and Njamen, Guy and Nguyen‐Tri, Phuong},
  title = {Design and Statistical Optimization of PLA Organoclay‐Based Dispersions for Recyclable Packaging Paper},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {6},
  pages = {4321--4333},
  doi = {10.1002/pen.70499}
}
Kostenlos starten →