EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Optimization of Biodegradable and Recyclable Composite PLA/PHA Parts

Burak Kisin iD, Mehmet Kivanc Turan iD, Fatih Karpat iD

Polymers · 06.08.2025 · 17 (15) · 2147

DOI: 10.3390/polym17152147 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.08.2025. Verfasst von Burak Kisin und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Bursa Uludağ University, Bursa 16059, Turkey. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Grammer Koltuk Sistemleri Sanayi ve Ticaret A.Ş..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing (AM) techniques, especially fused deposition modeling (FDM), offer significant advantages in terms of cost, material efficiency, and design flexibility. In this study, the mechanical performance of biodegradable PLA/PHA composite samples produced via FDM was optimized by evaluating the influence of key printing parameters—layer height, printing orientation, and printing speed—on both the tensile and compressive strength. A full factorial design (3 × 3 × 3) was employed, and all of the samples were triplicated to ensure the consistency of the results. Grey relational analysis (GRA) was used as a multi-objective optimization method to determine the optimal parameter combinations. An analysis of variance (ANOVA) was also conducted to assess the statistical significance of each parameter. The ANOVA results revealed that printing orientation is the most significant parameter for both tensile and compression strength. The optimal parameter combination for maximizing mechanical properties was a layer height of 0.1 mm, an X printing orientation, and a printing speed of 50 mm/s. This study demonstrates the effectiveness of GRA in optimizing the mechanical properties of biodegradable composites and provides practical guidelines to produce environmentally sustainable polymer parts.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcompressiongrey relational analysisoptimizationphaplatensile

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Bursa Uludağ University, Bursa 16059, Turkey.

ORCID-Profile: Burak Kisin, Mehmet Kivanc Turan, Fatih Karpat

Förderung

  • Grammer Koltuk Sistemleri Sanayi ve Ticaret A.Ş.

Zitieren

APA

Kisin, B., Turan, M. K., & Karpat, F. (2025). Multi-Objective Optimization of Biodegradable and Recyclable Composite PLA/PHA Parts. Polymers, 17(15), 2147. https://doi.org/10.3390/polym17152147

Vancouver

Kisin B, Turan MK, Karpat F. Multi-Objective Optimization of Biodegradable and Recyclable Composite PLA/PHA Parts. Polymers. 2025;17(15):2147. doi:10.3390/polym17152147

BibTeX
@article{Kisin2025,
  author = {Kisin, Burak and Turan, Mehmet Kivanc and Karpat, Fatih},
  title = {Multi-Objective Optimization of Biodegradable and Recyclable Composite PLA/PHA Parts},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {15},
  pages = {2147},
  doi = {10.3390/polym17152147}
}
Kostenlos starten →