EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Tailoring Carbon Additives Synergy in Co‐Continuous PVDF / PET Nanocomposites for Enhanced PEM Fuel Cell Bipolar Plates

Sahar Shojaei, Ehsan Rostami‐Tapeh‐Esmaeil, Frej Mighri, Saïd Elkoun, Martin Brassard, Elaheh Oliaii, Serguei Mikhailenko, Samaneh Shahgaldi, Arkhat Muneendra Prasad, Philippe Pelletier, Guy Jourdain, Yves Bonnefoy

Polymer Engineering & Science · 2026-01 · 66 (1) · 443-458

DOI: 10.1002/pen.70225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 30.10.2025. Verfasst von Sahar Shojaei und 11 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The advancement of proton exchange membrane fuel cells (PEMFCs) requires the development of bipolar plates (BPPs) that are lightweight, mechanically and thermally performant, and possess adequate electrical conductivity. This study investigates co‐continuous nanocomposites based on a blend of polyvinylidene fluoride (PVDF) and polyethylene terephthalate (PET), reinforced with hybrid electrically conductive fillers. A total filler loading of 60 wt.% was employed, comprising combinations of graphite (GR), carbon black (CB), carbon fiber (CF), and multi‐walled carbon nanotubes (MWCNTs). Morphological analysis revealed that, beyond the co‐continuous structure of the PVDF/PET matrix and the preferential localization of the conductive fillers within the PET phase, the strategic combination of micro‐ and nanoscale fillers promoted the formation of continuous conductive networks. Thermogravimetric analysis indicated excellent thermal stability, with a maximum decomposition temperature of 438°C for graphite‐rich formulations, accompanied by an ash content of ~80%. Electrical resistivity was markedly reduced through hybrid filler incorporation, with the best‐performing formulation (2.5/7.5/3.0 wt.% CF/CB/MWCNTs) achieving 0.087 Ω·cm (through‐plane) and 0.042 Ω·cm (in‐plane). Mechanical characterization showed that CB enhanced flexural strength, CF increased stiffness, and MWCNTs improved overall mechanical integrity, underscoring the synergistic effect of the filler system. Water uptake remained low across all samples, with a minimum of 0.023% observed for 1 wt.% MWCNTs after 168 h, and only 0.068% at 3 wt.%. Polarization curve analysis demonstrated that the inclusion of 2.5 wt.% CF and 7.5 wt.% CB significantly enhanced the electrochemical performance of PEMFCs, validating the potential of these hybrid‐filled PVDF/PET nanocomposites for next‐generation BPP applications.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Shojaei, S., Rostami‐Tapeh‐Esmaeil, E., Mighri, F., Elkoun, S., Brassard, M., Oliaii, E., Mikhailenko, S., Shahgaldi, S., Prasad, A. M., Pelletier, P., Jourdain, G., & Bonnefoy, Y. (2026). Tailoring Carbon Additives Synergy in Co‐Continuous PVDF / PET Nanocomposites for Enhanced PEM Fuel Cell Bipolar Plates. Polymer Engineering & Science, 66(1), 443-458. https://doi.org/10.1002/pen.70225

Vancouver

Shojaei S, Rostami‐Tapeh‐Esmaeil E, Mighri F, Elkoun S, Brassard M, Oliaii E, et al. Tailoring Carbon Additives Synergy in Co‐Continuous PVDF / PET Nanocomposites for Enhanced PEM Fuel Cell Bipolar Plates. Polymer Engineering & Science. 2026;66(1):443-458. doi:10.1002/pen.70225

BibTeX
@article{Shojaei2026,
  author = {Shojaei, Sahar and Rostami‐Tapeh‐Esmaeil, Ehsan and Mighri, Frej and Elkoun, Saïd and Brassard, Martin and Oliaii, Elaheh and Mikhailenko, Serguei and Shahgaldi, Samaneh and Prasad, Arkhat Muneendra and Pelletier, Philippe and Jourdain, Guy and Bonnefoy, Yves},
  title = {Tailoring Carbon Additives Synergy in Co‐Continuous PVDF / PET Nanocomposites for Enhanced PEM Fuel Cell Bipolar Plates},
  journal = {Polymer Engineering & Science},
  year = {2026},
  volume = {66},
  number = {1},
  pages = {443--458},
  doi = {10.1002/pen.70225}
}
Kostenlos starten →