EUVIMEDOtkrijte EUVIMED
Crossref

3D Printing of Graphene/Carbon Nanotube Hybrid Composites for Tunable Electromagnetic Interference Shielding

Siwen Deng, Yunyang Ma, Yuanjun Yang, Liping Shu, Yi Yang, Shulong Zeng, Shaohong Shi

Polymer Composites · 2026-11-20

DOI: 10.1002/pc.71908 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-20. Written by Siwen Deng and 6 co-authors. 40 references. Funded by: National Natural Science Foundation of China.

SažetakBibliografski podaciCiteRelated studies

Abstract (original language)

With the rapid development of 5G communication, Internet of Things (IoT), and wearable intelligent electronic equipment, lightweight, miniaturized, and customizable electromagnetic interference (EMI) shielding materials are urgently required. In this work, polylactic acid/graphene/carbon nanotube (PLA/Gr/CNT) hybrid composite filaments were fabricated via melt compounding, and fused deposition modeling (FDM) 3D printing was adopted to manufacture architecturally tunable EMI shielding parts for conformal assembly within integrated electronic systems. Via a hybridization strategy, 1D CNTs were incorporated to function as cross‐scale conductive bridges linking discrete 2D graphene nanosheets, thereby constructing an interpenetrating 3D hybrid nanocarbon conductive network inside the PLA matrix. While tuning the CNT/Gr ratio boosted the electrical conductivity from 2.7 × 10 −3 to 37.3 S·m −1 at a constant low filler loading, structural optimization of aperture geometry and thickness enabled the printed parts to attain an EMI SE of 36.2 dB within the X‐band. By optimizing parameters such as thickness and aperture structure, absorption‐dominated electromagnetic shielding ( A > 0.8) can be achieved while meeting the shielding criterion of 20 dB. Leveraging the high design freedom of FDM 3D printing, conformal assembly between printed parts and complex‐shaped electronic components can be achieved, which was conceptually validated by the successful fabrication of in situ integrated shielding housings, miniaturized shielding frames, and detachable perforated shielding plates.

Funding

  • National Natural Science Foundation of China

Cite

APA

Deng, S., Ma, Y., Yang, Y., Shu, L., Yang, Y., Zeng, S., & Shi, S. (2026). 3D Printing of Graphene/Carbon Nanotube Hybrid Composites for Tunable Electromagnetic Interference Shielding. Polymer Composites. https://doi.org/10.1002/pc.71908

Vancouver

Deng S, Ma Y, Yang Y, Shu L, Yang Y, Zeng S, et al. 3D Printing of Graphene/Carbon Nanotube Hybrid Composites for Tunable Electromagnetic Interference Shielding. Polymer Composites. 2026. doi:10.1002/pc.71908

BibTeX
@article{Deng2026,
  author = {Deng, Siwen and Ma, Yunyang and Yang, Yuanjun and Shu, Liping and Yang, Yi and Zeng, Shulong and Shi, Shaohong},
  title = {3D Printing of Graphene/Carbon Nanotube Hybrid Composites for Tunable Electromagnetic Interference Shielding},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71908}
}
Start for free →