EUVIMEDTutustu EUVIMEDiin
Crossref

Sol–Gel Engineered Iron Borate Nanoparticles Unlocking Superior Dielectric and Electromagnetic Interference Shielding Performance in Flexible Poly(Vinylidene Fluoride) Composites

Deepa Suresh, S. V. Neethumol, P. Swetha, Nishanth Dominic, T. H. Mohamed Shahin, Sindhu Swaminathan

Polymer Composites · 2026-11-18

DOI: 10.1002/pc.71878 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-18. Written by Deepa Suresh and 5 co-authors. 69 references.

TiivistelmäBibliografiset tiedotCiteRelated studies

Abstract (original language)

Rapid development of fifth‐generation communication systems and Internet‐of‐Things (IoT) platforms requires materials that are lightweight, flexible, environmentally stable, scalable, and have a high electromagnetic interference (EMI) shielding efficiency. In order to enhance dielectric and EMI shielding performance, a magnetically active polymer nanocomposite was developed by incorporating iron borate (Fe 3 BO 6 ) nanoparticles into a poly(vinylidene fluoride) (PVDF) matrix. Here, Fe 3 BO 6 nanoparticles were synthesized by a citric acid‐assisted sol–gel technique and uniformly dispersed in the PVDF matrix via the solution casting method. A clear percolation threshold occurs at 12 wt% Fe 3 BO 6 content, where conductivity increases by nearly seven orders of magnitude and the composite achieves an ultrahigh dielectric permittivity of ~1.38 × 10 5 at 1 Hz for a 0.9 mm thick film. Above this threshold, total shielding effectiveness reaches ~25 dB, satisfying practical application requirements. The increased shielding comes from the synergistic conductive networks, magnetic losses, and strong interfacial polarization at the PVDF‐Fe 3 BO 6 interfaces, which contribute to effective electromagnetic attenuation. The composites show excellent environmental stability, with negligible variations in permittivity and conductivity values after 1 year of storage. In addition, mechanical bending increases permittivity owing to a stress‐induced α → β phase transition in PVDF, which enhances the dipolar alignment and interfacial polarization. These findings demonstrate that PVDF/Fe 3 BO 6 nanocomposites are highly promising candidates for EMI shielding.

Cite

APA

Suresh, D., Neethumol, S. V., Swetha, P., Dominic, N., Shahin, T. H. M., & Swaminathan, S. (2026). Sol–Gel Engineered Iron Borate Nanoparticles Unlocking Superior Dielectric and Electromagnetic Interference Shielding Performance in Flexible Poly(Vinylidene Fluoride) Composites. Polymer Composites. https://doi.org/10.1002/pc.71878

Vancouver

Suresh D, Neethumol SV, Swetha P, Dominic N, Shahin THM, Swaminathan S. Sol–Gel Engineered Iron Borate Nanoparticles Unlocking Superior Dielectric and Electromagnetic Interference Shielding Performance in Flexible Poly(Vinylidene Fluoride) Composites. Polymer Composites. 2026. doi:10.1002/pc.71878

BibTeX
@article{Suresh2026,
  author = {Suresh, Deepa and Neethumol, S. V. and Swetha, P. and Dominic, Nishanth and Shahin, T. H. Mohamed and Swaminathan, Sindhu},
  title = {Sol–Gel Engineered Iron Borate Nanoparticles Unlocking Superior Dielectric and Electromagnetic Interference Shielding Performance in Flexible Poly(Vinylidene Fluoride) Composites},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71878}
}
Start for free →