Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications
Polymer Composites · 2026-11-16
DOI: 10.1002/pc.71870 ↗At a glance
Journal article in Polymer Composites, published online on 2026-11-16. Written by Zeyu Li and 9 co-authors. 70 references.
Abstract (original language)
Constructing a continuous three‐dimensional filler network in a polymer matrix is an effective strategy to overcome interfacial thermal resistance and enhance the thermal conductivity of composite materials. General‐purpose pitch‐based carbon fibers (GPCF) demonstrate broad application prospects in thermally conductive materials and thermal management owing to their favorable thermal conductivity and processability. In this work, three‐dimensional general‐purpose pitch‐based carbon fiber felts (GPCFF) were fabricated via airflow‐needle punching and high‐temperature heat treatment using GPCF and epoxy resin (EP) as raw materials. Subsequently, GPCFF/EP composites were prepared via vacuum impregnation and compression molding. Experimental results indicate that the thermal conductivity of GPCFF/EP composites increases with rising heat treatment temperature and GPCF loading, reaching 3.70 W/mK (20.56 vol% GPCF, heat treatment temperature of 2900°C), which is approximately 17.62 times higher than that of pure EP (0.21 W/mK). High‐temperature heat treatment effectively enhances the graphitization degree of carbon fibers, thereby improving their intrinsic thermal conductivity. The three‐dimensional fiber network constructed by needle‐punching forms continuous heat transfer channels. Under compression molding, the filler network becomes densified, further improving the thermal conductivity of GPCFF/EP composites. Macroscopic and microscopic heat transfer mechanisms of GPCFF/EP composites are validated by combining a parallel heat conduction model with COMSOL numerical simulations. Infrared thermography and LED heat dissipation tests demonstrate that GPCFF/EP composites exhibit excellent thermal management performance. This study aims to provide recommendations for the fabrication and engineering application of highly thermally conductive composite materials.
Cite
APA
Li, Z., Wang, Y., Xiang, L., Tang, B., Shi, S., Chen, J., Guan, H., Jiang, T., Yu, J., & Wu, X. (2026). Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications. Polymer Composites. https://doi.org/10.1002/pc.71870
Vancouver
Li Z, Wang Y, Xiang L, Tang B, Shi S, Chen J, et al. Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications. Polymer Composites. 2026. doi:10.1002/pc.71870
BibTeX
@article{Li2026,
author = {Li, Zeyu and Wang, Ying and Xiang, Lixue and Tang, Bo and Shi, Shanshan and Chen, Jin and Guan, Huijuan and Jiang, Tao and Yu, Jinhong and Wu, Xinfeng},
title = {Synergistic Construction of General‐Purpose Pitch‐Based Carbon Fiber Felt/Epoxy Thermally Conductive Composites via Three‐Dimensional Needled Networks and High‐Temperature Graphitization for Thermal Management Applications},
journal = {Polymer Composites},
year = {2026},
doi = {10.1002/pc.71870}
}
EUVIMED