EUVIMEDExplore EUVIMED
Crossref

Effects of the Graphene Oxide/Nano‐ SiO 2 Ratio on the Engineering Performance of Oil‐Based Polyurethane Grouting Materials

JunJun Cao, Yingjie Wei, Mengyao Zhao, Chao Tang, Yuxin Jie

Polymer Composites · 2026-11-16

DOI: 10.1002/pc.71859 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-16. Written by JunJun Cao and 4 co-authors. 52 references. Funded by: Beijing Nova Program, National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities.

AbstractBibliographic detailsCiteRelated studies

Abstract (original language)

Water leakage threatens underground infrastructure, yet conventional oil‐based polyurethane grouts face a trade‐off between slurry fluidity and cured‐material strength and water resistance. Graphene oxide (GO) and nano‐SiO 2 were surface‐modified with 3‐aminopropyltriethoxysilane (APTES, commercially designated KH‐550), washed, vacuum‐dried, and dispersed into the polyol component before reaction with polymethylene polyphenyl isocyanate (PAPI). The total modified filler loading was fixed at 4 g while the GO/nano‐SiO 2 ratio was varied. The 2 g/2 g formulation increased compressive strength by 64.8% to 4.22 MPa and retained 4.09 MPa after 7‐day immersion. The 1 g/3 g formulation provided the highest tensile strength and lowest water uptake among the tested compositions, with higher Component A apparent viscosity as a trade‐off. A two‐dimensional plane‐strain finite element model evaluated the mechanical response of a cured plug prepared from the 2 g/2 g formulation under hydraulic loading. Compression dominated the calculated body‐failure tendency; longer plugs reduced failure risk, whereas wider fractures reduced pressure‐bearing capacity. These findings support application‐specific formulation screening and comparative assessment of plug geometry. Direct injectability, permeability, and field performance require further validation.

Funding

  • Beijing Nova Program
  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities

Cite

APA

Cao, J., Wei, Y., Zhao, M., Tang, C., & Jie, Y. (2026). Effects of the Graphene Oxide/Nano‐ SiO 2 Ratio on the Engineering Performance of Oil‐Based Polyurethane Grouting Materials. Polymer Composites. https://doi.org/10.1002/pc.71859

Vancouver

Cao J, Wei Y, Zhao M, Tang C, Jie Y. Effects of the Graphene Oxide/Nano‐ SiO 2 Ratio on the Engineering Performance of Oil‐Based Polyurethane Grouting Materials. Polymer Composites. 2026. doi:10.1002/pc.71859

BibTeX
@article{Cao2026,
  author = {Cao, JunJun and Wei, Yingjie and Zhao, Mengyao and Tang, Chao and Jie, Yuxin},
  title = {Effects of the Graphene Oxide/Nano‐ SiO 2 Ratio on the Engineering Performance of Oil‐Based Polyurethane Grouting Materials},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71859}
}
Start for free →