EUVIMEDPoznaj EUVIMED
Crossref

Low‐Velocity Impact Behavior of Double‐Layer Honeycomb Sandwich Composites With a Frequency Selective Surface Layer

Jiawei Wang, Deng'an Cai, Qi Zhang, Yingjiang Guo, Guangming Zhou

Polymer Composites · 2026-11-19

DOI: 10.1002/pc.71807 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-19. Written by Jiawei Wang and 4 co-authors. 35 references. Funded by: Nanjing University of Aeronautics and Astronautics, Aviation Industry Corporation of China, Priority Academic Program Development of Jiangsu Higher Education Institutions.

AbstraktDane bibliograficzneCiteRelated studies

Abstract (original language)

The incorporation of frequency selective surfaces as additional functional interfaces embedded between layers may introduce new material discontinuities, thereby adversely affecting the damage behavior of the structure under impact loading and its residual load‐bearing capacity after impact. This study investigated double‐layer aramid paper honeycomb sandwich panels fabricated from quartz fiber composites with and without an embedded frequency selective surface (FSS) layer. Low‐velocity impact (LVI) tests under different impact energy levels and compression‐after‐impact (CAI) tests were conducted. The results indicate that the FSS layer exerts a significantly detrimental effect on both impact damage behavior and post‐impact residual load‐bearing capacity, with the most pronounced influence observed under moderate impact energies, whereas its degrading effect diminishes under low‐ and high‐energy impact conditions. In terms of impact response, the specimen with an FSS layer exhibited consistently larger maximum displacement and permanent dent depth than that without an FSS layer under the same impact energy. The FSS layer was more prone to interfacial failure under impact loading, promoting the through‐thickness propagation of impact damage. In terms of CAI performance, the peak load of the specimen with an FSS layer decreased by approximately 57.4%, exceeding the 55.7% reduction observed for the specimen without an FSS layer. The reduced interlaminar bonding strength between adjacent layers was caused by the FSS layer, resulting in a larger delamination area and deeper local geometric defects in the specimen with an FSS layer during impact. Under compressive loading, these defects were more likely to induce local buckling instability, leading to an earlier reduction in the overall load‐bearing capacity.

Funding

  • Nanjing University of Aeronautics and Astronautics
  • Aviation Industry Corporation of China
  • Priority Academic Program Development of Jiangsu Higher Education Institutions

Cite

APA

Wang, J., Cai, D., Zhang, Q., Guo, Y., & Zhou, G. (2026). Low‐Velocity Impact Behavior of Double‐Layer Honeycomb Sandwich Composites With a Frequency Selective Surface Layer. Polymer Composites. https://doi.org/10.1002/pc.71807

Vancouver

Wang J, Cai D, Zhang Q, Guo Y, Zhou G. Low‐Velocity Impact Behavior of Double‐Layer Honeycomb Sandwich Composites With a Frequency Selective Surface Layer. Polymer Composites. 2026. doi:10.1002/pc.71807

BibTeX
@article{Wang2026,
  author = {Wang, Jiawei and Cai, Deng'an and Zhang, Qi and Guo, Yingjiang and Zhou, Guangming},
  title = {Low‐Velocity Impact Behavior of Double‐Layer Honeycomb Sandwich Composites With a Frequency Selective Surface Layer},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71807}
}
Start for free →