EUVIMEDOpdag EUVIMED
Crossref

Interlaminar Shear Strength and Low‐Velocity Impact Tolerance of Carbon Fiber/Epoxy Laminates Enhanced by an Ultrathin Resin‐Infiltrated Porous Copper Framework

Xutong Han, Xinggang Jiang, Deyuan Zhang

Polymer Composites · 2026-11-02

DOI: 10.1002/pc.71774 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-02. Written by Xutong Han and 2 co-authors. 31 references. Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Delamination and impact damage often initiate in the resin‐dominated interlaminar regions of carbon fiber‐reinforced polymer (CFRP) laminates. We designed a turtle‐carapace‐inspired architecture around an ultrathin, resin‐infiltrated porous copper framework. The framework was placed at the laminate mid‐plane, where epoxy infiltration formed an interpenetrating region through the thickness. Alkaline oxidative etching produced rough copper oxide/hydroxide micro/nanostructures on the copper ligaments, and aminosilane treatment was used to modify their interface with epoxy. Compared with the non‐interleaved CFRP laminate, the modified laminate showed a 19.4% higher mean interlaminar shear strength. Under low‐velocity impact, the mean peak force and final absorbed energy were 23.1% and 23.6% higher, respectively, whereas the mean maximum displacement was 9.5% lower. Mean compression‐after‐impact (CAI) strength was 23.5% higher. After specimen‐mass normalization, the mean CAI performance index was 115.5% ± 7.9% relative to Neat CFRP. Cross‐sectional and fracture observations indicate that epoxy penetrated the porous framework and interlocked with it through the thickness; the modified ligament surfaces also retained more resin after fracture. After accounting for the added interleaf mass, the laminate retained its gains in interlaminar shear strength and impact damage tolerance without any decrease in measured compressive or flexural performance, indicating a weight‐efficient interlaminar reinforcement route.

Funding

  • National Natural Science Foundation of China

Cite

APA

Han, X., Jiang, X., & Zhang, D. (2026). Interlaminar Shear Strength and Low‐Velocity Impact Tolerance of Carbon Fiber/Epoxy Laminates Enhanced by an Ultrathin Resin‐Infiltrated Porous Copper Framework. Polymer Composites. https://doi.org/10.1002/pc.71774

Vancouver

Han X, Jiang X, Zhang D. Interlaminar Shear Strength and Low‐Velocity Impact Tolerance of Carbon Fiber/Epoxy Laminates Enhanced by an Ultrathin Resin‐Infiltrated Porous Copper Framework. Polymer Composites. 2026. doi:10.1002/pc.71774

BibTeX
@article{Han2026,
  author = {Han, Xutong and Jiang, Xinggang and Zhang, Deyuan},
  title = {Interlaminar Shear Strength and Low‐Velocity Impact Tolerance of Carbon Fiber/Epoxy Laminates Enhanced by an Ultrathin Resin‐Infiltrated Porous Copper Framework},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71774}
}
Start for free →