EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Enhancing the Interface of PLA Composites Through Solution‐Based Processing

Innes McKay, Liu Yang, Reda Felfel

Polymer Composites · 2026-11-03

DOI: 10.1002/pc.71772 ↗

At a glance

Journal article in Polymer Composites, published online on 2026-11-03. Written by Innes McKay and 2 co-authors. 47 references. The full text is freely available (open access, CC BY 4.0). Funded by: University of Strathclyde.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The strength of the fiber‐matrix interface plays a critical role in controlling the mechanical performance of polymer composites for various applications. The ability to characterize the strength of that interface accurately and efficiently is therefore extremely important. The objective of the present work is to determine the effect of a previously unexplored sample preparation method on the apparent interfacial shear strength (τ app ) obtained using the microbond test. The τ app of glass, carbon, and natural (flax) fibers with polylactic acid (PLA) was evaluated using two methods: the conventional polymer fiber tying method and a novel polymer solution casting method. The τ app was found to strongly depend upon the sample preparation method employed. The average τ app obtained for glass, carbon, and flax‐PLA was 31%, 8%, and 17% higher for solution cast droplets than for tied, respectively. These results illustrate the potential for solution processing as a route to improved thermoplastic composite performance.

Funding

  • University of Strathclyde

Cite

APA

McKay, I., Yang, L., & Felfel, R. (2026). Enhancing the Interface of PLA Composites Through Solution‐Based Processing. Polymer Composites. https://doi.org/10.1002/pc.71772

Vancouver

McKay I, Yang L, Felfel R. Enhancing the Interface of PLA Composites Through Solution‐Based Processing. Polymer Composites. 2026. doi:10.1002/pc.71772

BibTeX
@article{McKay2026,
  author = {McKay, Innes and Yang, Liu and Felfel, Reda},
  title = {Enhancing the Interface of PLA Composites Through Solution‐Based Processing},
  journal = {Polymer Composites},
  year = {2026},
  doi = {10.1002/pc.71772}
}
Start for free →