EUVIMEDEUVIMED entdecken
Crossref

Ultraviolet Laser‐Induced Biomimetic Surface Texturing of Carbon Fiber Reinforced Polymers: Mechanisms Governing Adhesive Performance

Kangmei Li, Jiana Gan, Zihao Li, Qingzhe Du, Ziwen Tang, Jun Hu

Polymer Composites · 20.11.2026 · 47 (22) · 20545-20562

DOI: 10.1002/pc.71625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 18.09.2026. Verfasst von Kangmei Li und 5 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Interfacial regulation is critical for improving the adhesive performance of carbon fiber reinforced polymers (CFRP). Inspired by the leg microstructures of Tettigonia viridissima, this study proposes an ultraviolet nanosecond laser‐based fiber‐fracture biomimetic surface texturing strategy for biomimetic surface texturing of CFRP. The relationship among laser parameters, texture geometries, and surface wettability was established to achieve controllable fabrication of microtextures. Principal component analysis revealed that the arithmetic mean height Sa was the key descriptor for surface characterization. Orthogonal experimental optimization produced uniform biomimetic textures using a laser power of 15 W, scanning speed of 40 mm/s, and line spacing of 0.04 mm. Compared with conventional textures, the biomimetic hexagonal texture enhanced adhesive spreading and mechanical interlocking, thereby improving interfacial bonding. The water contact angle decreased by 41.69%, and the interfacial shear strength increased by 68.23% compared with the unprocessed surface. Failure analysis showed a transition from interfacial failure to cohesive failure within CFRP. Finite element analysis (FEA) demonstrated that biomimetic textures reduced peak interfacial tensile and peel stresses. This study clarifies the mechanism of ultraviolet laser induced texturing in regulating surface characteristics and adhesive performance, providing theoretical guidance for designing high performance adhesive joints.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, K., Gan, J., Li, Z., Du, Q., Tang, Z., & Hu, J. (2026). Ultraviolet Laser‐Induced Biomimetic Surface Texturing of Carbon Fiber Reinforced Polymers: Mechanisms Governing Adhesive Performance. Polymer Composites, 47(22), 20545-20562. https://doi.org/10.1002/pc.71625

Vancouver

Li K, Gan J, Li Z, Du Q, Tang Z, Hu J. Ultraviolet Laser‐Induced Biomimetic Surface Texturing of Carbon Fiber Reinforced Polymers: Mechanisms Governing Adhesive Performance. Polymer Composites. 2026;47(22):20545-20562. doi:10.1002/pc.71625

BibTeX
@article{Li2026,
  author = {Li, Kangmei and Gan, Jiana and Li, Zihao and Du, Qingzhe and Tang, Ziwen and Hu, Jun},
  title = {Ultraviolet Laser‐Induced Biomimetic Surface Texturing of Carbon Fiber Reinforced Polymers: Mechanisms Governing Adhesive Performance},
  journal = {Polymer Composites},
  year = {2026},
  volume = {47},
  number = {22},
  pages = {20545--20562},
  doi = {10.1002/pc.71625}
}
Kostenlos starten →