Effect of O 2 ‐Ar Mixed Gas Plasma Treatment on the Surface Properties of Carbon Fibers and the Interfacial Properties of Composites
Polymer Composites · 10.10.2026 · 47 (19) · 17329-17348
DOI: 10.1002/pc.71417 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 16.07.2026. Verfasst von Long Liu und 3 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
To improve the interfacial bonding strength between T800 carbon fibers (CF) and polyimide resin, this study employed O 2 ‐Ar mixed gas plasma for modification treatment of the CF. In this study, the gas flow rates were controlled to indirectly regulate the gas ratio, and O 2 ‐Ar mixed‐gas component experiments were conducted. The optimal O 2 ‐Ar mixing ratio was determined to be 5:5. Based on this optimal ratio, orthogonal experiments were carried out to determine the optimal treatment conditions under O 2 ‐Ar mixed‐gas plasma. Under optimal treatment conditions, both the room‐temperature and high‐temperature interlaminar shear strength (ILSS) of the composites were significantly improved. The room‐temperature ILSS increased from 100.89 to 124.75 MPa, corresponding to an enhancement of 23.6%; while the ILSS at 300°C increased from 69.98 to 97.42 MPa, representing an improvement of 39.2%. By combining objective evidence from microscopic characterization, carbon fiber contact angle and surface energy data, mechanical property data, and the cross‐section of the composite after failure, the synergistic mechanism of the O 2 ‐Ar mixed gas was elucidated, providing ideas and methods that can serve as a reference for subsequent research on multi‐component mixed gases.
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Liu, L., Zhen, G., Ren, S., & Chen, P. (2026). Effect of O 2 ‐Ar Mixed Gas Plasma Treatment on the Surface Properties of Carbon Fibers and the Interfacial Properties of Composites. Polymer Composites, 47(19), 17329-17348. https://doi.org/10.1002/pc.71417
Vancouver
Liu L, Zhen G, Ren S, Chen P. Effect of O 2 ‐Ar Mixed Gas Plasma Treatment on the Surface Properties of Carbon Fibers and the Interfacial Properties of Composites. Polymer Composites. 2026;47(19):17329-17348. doi:10.1002/pc.71417
BibTeX
@article{Liu2026,
author = {Liu, Long and Zhen, Guoqing and Ren, Sibo and Chen, Ping},
title = {Effect of O 2 ‐Ar Mixed Gas Plasma Treatment on the Surface Properties of Carbon Fibers and the Interfacial Properties of Composites},
journal = {Polymer Composites},
year = {2026},
volume = {47},
number = {19},
pages = {17329--17348},
doi = {10.1002/pc.71417}
}
EUVIMED